Microstructure and properties of ultrasonic assisted copper coated graphite foams
Source abstract
Abstract
Mesophase pitch based graphite foams were electroplated with copper to obtain the improved mechanical and thermal properties and to extend their applications in heat sinks. A nickel interlayer was electroplated prior to copper to improve the wettability and bonding between copper and the graphite foams. An ultrasonic oscillation device and a rotary cathode were applied to enhance the mass transfer and to ensure the more even coatings throughout the foams from inside. Microstructure and properties of the copper coated foams were studied. Results indicated the copper coatings greatly improved the mechanical and thermal properties of the foams. With the prolonged timescale of plating, the foams possessed enhanced mechanical and thermal properties. After 16 min. of plating, the bending strength of the foams increased from 1·1 to 7·6 MPa, and the thermal conductivity of the foams reached 100·2 from 81·6 W m−1 K−1, while the porosity was reduced only by 4·2.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Heat and Mass Transfer in Porous Media · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Nuclear Analysis Technique Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China
Key Laboratory of Carbon Materials Institute of Coal Chemistry, Chinese, Academy of Sciences, Taiyuan 030001, China
School of Materials Science and Engineering University of Jinan, Jinan 250022, China
References (21)
Show source-provided references
1. 10.1016/S0008-6223(03)00091-510.1016/S0008-6223(03)00091-5 ↗
2. 10.1016/S1359-4311(01)00042-410.1016/S1359-4311(01)00042-4 ↗
3. 10.1016/j.carbon.2010.12.01810.1016/j.carbon.2010.12.018 ↗
4. 10.1016/j.carbon.2011.03.03810.1016/j.carbon.2011.03.038 ↗
5. 10.1016/j.carbon.2007.05.01410.1016/j.carbon.2007.05.014 ↗
6. 10.1016/j.carbon.2005.12.02510.1016/j.carbon.2005.12.025 ↗
7. 10.1016/S1872-5805(12)60002-X10.1016/S1872-5805(12)60002-X ↗
8. 10.1016/j.msea.2007.11.03410.1016/j.msea.2007.11.034 ↗
9. 10.1016/j.enconman.2009.08.00610.1016/j.enconman.2009.08.006 ↗
10. 10.1016/j.matlet.2008.09.05910.1016/j.matlet.2008.09.059 ↗
11. Klett JW, Lowden R, McMillan A: Proc. 2nd World Conf. on ‘Carbon’, Lexington, Kentucky, USA, 2001.
12. 10.1016/j.carbon.2009.05.01410.1016/j.carbon.2009.05.014 ↗
13. Franco L · Compos. A · 1972 · 3 · 47
14. 10.1016/S0043-1648(02)00038-810.1016/S0043-1648(02)00038-8 ↗
15. 10.1016/j.scriptamat.2008.02.02610.1016/j.scriptamat.2008.02.026 ↗
16. 10.1007/BF0264881810.1007/BF02648818 ↗
17. 10.1007/s00542-009-0950-y10.1007/s00542-009-0950-y ↗
18. Huang BY, Li CG: ‘China materials engineering canon’, Vol. 4, 215–272; 2005, Beijing, Chemical Industry Press.
19. Mueller J · Mater. Sci. Technol. · 2007 · 6 · 3462
20. Wu QR, Liu ZQ: ‘Thermophysical properties of inorganic functional materials’, 64–105; 2003, Guangzhou, South China University Technology Press.
21. 10.1017/CBO978113987832610.1017/CBO9781139878326 ↗