journal article·2012-11

Nanostructured martensite–austenite dual phase steels

F Hu, K M Wu, R D K Misra

Materials Science and Technology· Volume 28· Issue 11
Publisher page

Abstract

Nanostructured martensite–austenite microstructure was achieved by a quenching–partitioning–tempering (Q–P–T) treatment of high carbon low temperature bainitic steel. Microstructure observations showed that the nanostructured steel consisted of fine martensite (about 25 nm in thickness), retained austenite and carbides. X-ray diffraction analysis indicated that carbon was partitioned into austenite after martensite transformation. High hardness (about 655 HV1) and relatively high retained austenite fraction (0·36–0·41) was attained. The heat treatment times were greatly reduced, nearly equal or higher hardness and retained austensite fraction were achieved by Q–P–T treatment, compared with low temperature super bainite process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

International Research Institute for Steel Technology, Wuhan University of Science and Technology, Wuhan 430081, China

Center for Structural and Functional Materials, University of Louisiana at Lafayette PO Box 44130, Lafayette, LA 70504, USA

References (26)

Show source-provided references
1. 10.4028/www.scientific.net/MSF.500-501.49510.4028/www.scientific.net/MSF.500-501.495 ↗
2. 10.2355/isijinternational.43.123810.2355/isijinternational.43.1238 ↗
3. Bhadeshia HKDH: ‘Bainite in steels’, 2nd edn; 2001, London, IOM Communications.
4. 10.1016/j.actamat.2009.12.02010.1016/j.actamat.2009.12.020 ↗
5. 10.1016/j.actamat.2006.08.03310.1016/j.actamat.2006.08.033 ↗
6. 10.2355/isijinternational.45.173610.2355/isijinternational.45.1736 ↗
7. 10.2355/isijinternational.43.182110.2355/isijinternational.43.1821 ↗
8. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
9. 10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
10. 10.1016/j.msea.2006.02.13310.1016/j.msea.2006.02.133 ↗
11. 10.4028/www.scientific.net/MSF.561-565.228310.4028/www.scientific.net/MSF.561-565.2283 ↗
12. Zhong N: ‘Research on high strength Q&P and Q–P–T steel’, PhD thesis, Shanghai Jiao Tong University, Shanghai, China, 2009.
13. 10.1016/j.msea.2008.11.01410.1016/j.msea.2008.11.014 ↗
14. 10.1016/j.msea.2010.02.02610.1016/j.msea.2010.02.026 ↗
15. 10.1016/j.msea.2011.07.00810.1016/j.msea.2011.07.008 ↗
16. 10.1016/S0924-0136(01)00638-010.1016/S0924-0136(01)00638-0 ↗
17. Gerdemann FLH: ‘Microstructure and hardness of 9260 steel heat-treated by the quenching and partitioning process’, PhD thesis, Aachen University of Technology, Aachen, Germany, 2004.
18. J-MatPro 4·0: http://www.cntech.com.cn/product/JMatPro.html
19. Lindström A: ‘Austempered high silicon steel – investigation of wear resistance in a carbide free microstructure’, Master's thesis, Luleå University of Technology, Luleå, Sweden, 2006.
20. 10.1016/0001-6160(65)90061-110.1016/0001-6160(65)90061-1 ↗
21. 10.1179/mst.1991.7.8.68610.1179/mst.1991.7.8.686 ↗
22. Peet M, Bhadeshia HKDH: ‘Materials algorithms project’, http://www.msm.cam.ac.uk/map/steel/tar/mucg83.exe
23. 10.1016/j.actamat.2007.08.05110.1016/j.actamat.2007.08.051 ↗
24. 10.1016/j.scriptamat.2009.03.02110.1016/j.scriptamat.2009.03.021 ↗
25. 10.1179/02670830122500072510.1179/026708301225000725 ↗
26. 10.1007/s11661-010-0184-810.1007/s11661-010-0184-8 ↗