Microstructure and properties of heat treated iron powder compacts intended for ac soft magnetic applications
Source abstract
Abstract
This paper describes the effect of heat treatments on the microstructure and properties of iron powder specimens intended for ac soft magnetic applications at 60 Hz. The specimens were fabricated by compacting iron powder–lubricant (zinc stearate) mixes and heat treating the compacted specimens at 450–550°C in nitrogen. The microstructure and chemical characteristics of particle interfaces (X-ray photoelectron spectrometry) and the presence of microstrains (neutron diffraction) were correlated with the electrical and magnetic properties of the material. During the heat treatments (450–550°C), lubricant burns out and iron oxide contacts are created at particle interfaces (thermal oxidation bonding). Iron powder oxidation, which depends on the heat treatment temperature, reduces the electrical resistivity of the material and affects eddy current loss. The heat treatments modify the microstrains in the specimens and allow reduction of the hysteresis portion of the magnetic loss.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. L. P. LEFEBVRE, S. PELLETIER, Y. THOMAS, and C. GFLINAS: in 'Advances in powder metallurgy and particulate materials', 8.59; 1998, Princeton, NJ, MPIF.
2. 10.1071/PH88021310.1071/PH880213 ↗
3. 10.1107/S010876738408920010.1107/S0108767384089200 ↗
4. A. C. LARSON and R. B. VON DREELE: `GSAS: General Structure Analysis System', LAUR 86–748, Los Alamos National Laboratory, Los Alamos, NM, USA.
5. 10.1107/S002188988708709010.1107/S0021889887087090 ↗
6. 10.1016/0369-643X(58)90029-X10.1016/0369-643X(58)90029-X ↗
7. C. F. LEGZDINS, I. V. SAMARASEKERA, and T. TROCZYNSKI: Proc. PM98 World Cong. 'PM into the 21st century', Vol. 2, 266–271; 1998, Shrewsbury, EPMA.
8. J. N. AUBORN and J. S. coo: in 'Advances in powder metallurgy and particulate materials', 3.103-3.116; 1994, Princeton, NJ, MPIF.
9. L. P. LEFEBVRE and Y. THOMAS: Proc. 'Powder metallurgy aluminum and light alloys for automotive applications', Dearborn, MI, 51–58; 1998, Princeton, NJ, MPIF.
10. C. W. BALE, A. D. PELTON, and W. T. THOMPSON: FACT-2.1, Ecole Polytechnique, Montreal, Canada (www.crct.polymtl. ca).
11. M. A. PHILLIPS, P. POURTALET, and I. LAMPRE: in 'Advances in powder metallurgy and particulate materials', 2.35-2.49; 1993, Princeton, NJ, MPIF.
12. UPADHYA K. · J. Met · 1984 · 36 · 39
13. 10.1007/s11663-996-0014-y10.1007/s11663-996-0014-y ↗
14. N. BIRKS and G. H. MEIER: 'Introduction to high temperature oxidation of metals', 74; 1983, London, Edward Arnold.
15. A. LE R. DAWSON, S. PELLETIER, and J. BUSSIERE: 'Advances in powder metallurgy and particulate materials', 7–303; 1996, Princeton, NJ, MPIF.
16. D. BRIGGS and M. P. SEAH: 'Practical surface analysis by Auger and X-ray photoelectron spectroscopy', 411; 1983, New York, Wiley.
17. DWYER J. · Adv. Powder TechnoL · 1992 · 3 · 183
18. L. P. LEFEBVRE, S. PELLETIER, Y. THOMAS, and C. GFLINAS: in 'Advances in powder metallurgy and particulate materials', 8.61-8.73; 1998, Princeton, NJ, MPIF.
19. D. B. GOLDMAN: 'Physical chemistry of powder metals produc-tion and processing', 431–440; 1989, Warrendale, PA, TMS.
20. 10.1002/sia.74022016110.1002/sia.740220161 ↗
21. 10.1002/sia.74022019810.1002/sia.740220198 ↗
22. LEFEBVRE L. P. · Int. J. Powder Metall · 1998 · 34 · 51
23. C. GFLINAS, F. CHAGNON, S. PELLETIER, and L. P. LEFEBVRE: in 'Advances in powder metallurgy and particulate materials', 8.3-8.11; 1998, Princeton, NJ, MPIF.
24. 10.1179/pom.1988.31.2.11310.1179/pom.1988.31.2.113 ↗
25. L. P. LEFEBVRE, S. PELLETIER, and C. GFLINAS: in 'Advances in powder metallurgy and particulate materials', 8.11-8.19; 1999, Princeton, NJ, MPIF.
26. L. P. LEFEBVRE, S. PELLETIER, and C. GFLINAS: in 'Advances in powder metallurgy and particulate materials', 1.17-1.26; 1997, Princeton, NJ, MPIF.