journal article·2010-09

Analysis of constitutive behaviours and processing map of 7020 aluminium alloy

Q.-J. Liu, G. Fang

Materials Science and Technology· Volume 26· Issue 9
Publisher page

Abstract

The authors present a study on the hot formability of 7020 aluminium alloy. Isothermal hot compression tests of solid cylindrical specimens were performed in the temperature range of 300–550°C and the strain rate range of 0·001–10 s –1 . Stress–strain curves obtained from the experiment data are fitted using the Sellars–Tegart constitutive equation to obtain the constitutive parameters. Using the dynamic material model, the authors develop a processing map based on the flow stress data. The map shows that the parameters suitable for hot working are a temperature range of 450–550°C and a strain rate range of 0·001–0·1 s –1 . This parameter range is where the efficiency of power dissipation is above 27% and where dynamic recrystallisation occurs. Unstable regions to be avoided in hot forming are deduced from an instability condition. The processing map is validated by comparing the microstructures of deformed compression specimens.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical EngineeringTsinghua University, Beijing 100084, China

Department of Mechanical EngineeringTsinghua University, Beijing 100084, China, Key Laboratory of Advanced Materials Processing, Ministry of Education, Beijing, China;, Email: fangg@tsinghua.edu.cn

References (10)

Show source-provided references
1. 10.1016/S0924-0136(97)00133-710.1016/S0924-0136(97)00133-7 ↗
2. 10.1007/BF0266490210.1007/BF02664902 ↗
3. Prasad Y. and Rao K. P.: Mater. Sci Eng. A 2008 A487 (1-2) 316–327.10.1016/j.msea.2007.10.038 ↗
4. 10.1179/174328405X4751910.1179/174328405X47519 ↗
5. Prasad Y.: Ind. J. Technol., 1990, 28, (6-8), 435–451.
6. 10.1063/1.170736310.1063/1.1707363 ↗
7. 10.1361/10599490177034517810.1361/105994901770345178 ↗
8. van Haaften W. M. Magnin B. Kool W. H. and Katgerman L.: Metall. Mater. Trans A 2002 33A (7) 1971–1980.10.1007/s11661-002-0030-8 ↗
9. 10.1016/j.jmatprotec.2005.09.02110.1016/j.jmatprotec.2005.09.021 ↗
10. Puchi-Cabrera E. S.: Mater. Sci Technol, 2003, 19, (6), 715–722.