journal article·2006-06

Transmission electron microscopy study of copper–carbon nanocomposite

P. A. Carvalho, I. Fonseca, M. T. Marques, J. B. Correia, R. Vilar

Materials Science and Technology· Volume 22· Issue 6
Publisher page

Abstract

A Cu–10C nanocomposite has been synthesised by high energy milling of elemental powders, followed by annealing at 873 K. Phase identification and microstructure characterisation have been carried out with transmission electron microscopy. Copper grain size ranged from 10 to 120 nm for the as milled material and from 10 to 150 nm after annealing. No graphite reflections could be detected by electron diffraction in either the as milled or annealed samples. Nevertheless, both conditions contain clusters of carbon of <10 nm, which could be of benefit for sliding wear applications. The lattice parameter measured after milling is compatible with a carbon solubility in the copper matrix ∼0·1 at.-%. The synthesised material showed excellent structural stability at 873 K, which is proposed to be dependent on solute drag effects resulting from boundary segregation. In fact, no grain boundary pinning by nanoparticles has been detected while a decrease in lattice parameter occurred during annealing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Decker B. F. · Trans. AIME · 1950 · 188 · 887
2. 10.1016/S1359-6454(00)00340-210.1016/S1359-6454(00)00340-2 ↗
3. 10.1016/j.scriptamat.2004.03.02810.1016/j.scriptamat.2004.03.028 ↗
4. 10.1016/j.scriptamat.2004.01.01610.1016/j.scriptamat.2004.01.016 ↗
5. Marques M. T., Correia J. B., Criado J. M., Dianez M. J., and Matteazzi P.: Key Eng. Mater., 2002, 230-232,652–655.10.4028/www.scientific.net/KEM.230-232.652 ↗
6. 10.2320/matertrans1989.39.77810.2320/matertrans1989.39.778 ↗
7. 10.1007/s11661-001-0162-210.1007/s11661-001-0162-2 ↗
8. 10.1023/A:100670170803910.1023/A:1006701708039 ↗
9. 10.1007/s11661-998-0145-710.1007/s11661-998-0145-7 ↗
10. 10.1016/S0257-8972(99)00475-210.1016/S0257-8972(99)00475-2 ↗
11. Garcia-Marquez J. M., Anton A., Jiminez A., Madrid M., Martinez M. A., and Bas J. A.: J. Mater. Proc. Technot, 2003, 143-144,290–293.10.1016/S0924-0136(03)00476-X ↗
12. 10.1016/0921-5093(91)90722-Y10.1016/0921-5093(91)90722-Y ↗
13. 10.1007/BF0055463310.1007/BF00554633 ↗
14. 10.1039/b003836i10.1039/b003836i ↗
15. 10.1007/BF0113011210.1007/BF01130112 ↗
16. Berner A., Fuks D., Ellis D. E., Mundim K. C., and Dorfman S.: Appl. Surf. Sci., 1991, 144–145, 677–681.10.1016/S0169-4332(98)00897-6 ↗
17. 10.1016/S0924-4247(98)00307-010.1016/S0924-4247(98)00307-0 ↗
18. 10.1016/S1369-8001(00)00019-610.1016/S1369-8001(00)00019-6 ↗
19. 10.1016/S0928-4931(01)00308-310.1016/S0928-4931(01)00308-3 ↗
20. 10.1016/S0166-1280(00)00789-210.1016/S0166-1280(00)00789-2 ↗
21. Stefanik P. · Mater. Sci. Lett · 1993 · 12 · 108310.1007/BF00420528 ↗
22. Valiev R. Z., Korznikov A. V., and Mulyukov R. R.: Mater. Sci. Eng. A, 1993, A168, 141–148.10.1016/0921-5093(93)90717-S ↗
23. 10.1002/pssa.221097010210.1002/pssa.2210970102 ↗
24. 10.1557/JMR.1998.005710.1557/JMR.1998.0057 ↗
25. 10.1016/j.actamat.2004.10.04210.1016/j.actamat.2004.10.042 ↗
26. 10.1063/1.163397510.1063/1.1633975 ↗
27. 10.1126/science.108372710.1126/science.1083727 ↗
28. Rösner H. · Philos. Mag. Lett · 2004 · 84 · 32110.1080/09500830410001675687 ↗
29. 10.1063/1.164405110.1063/1.1644051 ↗
30. 10.1126/science.109507110.1126/science.1095071 ↗
31. 10.1002/adem.20040021110.1002/adem.200400211 ↗
32. 10.1016/1359-6454(95)00231-610.1016/1359-6454(95)00231-6 ↗
33. 10.2320/matertrans1989.36.28210.2320/matertrans1989.36.282 ↗
34. 10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
35. Pearson W. B. ‘A handbook of lattice spacings and structures of metals and alloys’, 1958, Oxford, Pergamon Press.10.1063/1.3062734 ↗
36. 10.1016/0965-9773(96)00038-410.1016/0965-9773(96)00038-4 ↗
37. 10.1038/nmat119110.1038/nmat1191 ↗
38. Smallman R. E. ‘Modern physical metallurgy’, 4th edn, 335-379; 1985, London, Butterworth.10.1016/B978-0-408-71050-3.50014-9 ↗