Friction layers produced in two steels during laboratory friction testing
Source abstract
Abstract
The friction layers produced on SAE type 1065 and 20Mn2WNbB steels during laboratory friction testing have been characterised using optical microscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. A white layer is formed on the surface of SAE 1065 steel, composed of abnormal quenched martensite with a microhardness of 1020 HV(100 g). A dark grey friction layer with a microhardness of 600 HV(100 g) is formed on the surface of 20Mn2WNbB steel. This layer consists of tempered lath martensite with a low carbon content. Formation of the white layer in SAE 1065 steel occurs through austenitisation of the steel surface due to friction at a high sliding rate, followed by rapid cooling to a martensite structure. The martensite structure in this white layer exhibits a finer grain size and higher dislocation density than that obtained by normal quenching. However, in 20Mn2WNbB steel, the quenched martensite structure is transformed into tempered martensite by self-tempering during cooling. Charpy impact tests show that the impact toughness of SAE 1065 steel is significantly decreased owing to the presence of the white layer. However, there is only a small effect of the friction layer on the impact toughness of 20Mn2WNbB steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Miller B. A. · Adv. Mater. Process · 2000 · 157 · 43
2. Liu C., Zhao Z., Liu Y., and Northwood D. O.: in ‘Proceedings of the 9th international conference on creep and fracture of engineering materials and structures’, (ed.Parker J. D.), 789-797; 2001, London, The Institute of Materials.
3. Dikshit V. A. · Diss. Abstr. Int · 1992 · 53 · 276
4. 10.1016/0043-1648(94)06586-110.1016/0043-1648(94)06586-1 ↗
5. Sinha N. · Wire Ind · 1995 · 62 · 734
6. Zhao Z., Northwood D. O., Liu C., and Liu Y.: J. Mater. Process. TechnoL, 1999, 89-90,569–573.10.1016/S0924-0136(99)00017-5 ↗
7. Fang H. S.: Heat Treat. Met. (China), 1997, 4, 9-12 (in Chinese).
8. 10.1016/S0924-0136(01)00625-210.1016/S0924-0136(01)00625-2 ↗
9. Liu Y. X. ‘Principles of heat treatment’, 71–127; 1981, Beijing, Mechanical Industry Press (in Chinese).
10. Xu L. · Mater. Forum · 1992 · 16 · 43
11. Liu C. ‘A new 20Mn2VVNbB steel used in steel wire ropes for petroleum drilling’, PhD thesis, Harbin Institute of Technology, China, 1998,39–59.
12. Bulpett R. · Wear · 1993 · 162
13. Akcan S. · Cong. and Exhib., Nashville, TN, USA, ASME, Mech. Eng. Division, Vol · 1999 · 10 · 789
14. 10.1016/S0890-6955(99)00036-X10.1016/S0890-6955(99)00036-X ↗
15. Chaffron L. · Sér. IV · 2001 · 2 · 749
16. Liu Y. X., Zhao Z. B., Ji C. T., and Zhu Q. H.: J. Steel Wire Prod., 1995, 21, 8-11 (in Chinese).
17. Weiss K. · Adv. Mater. Process · 1999 · 156 · 19
18. Tomota Y., Aoyama M., Takenaka M., Kuratomian H., and Tanimoto I.: Trans. Jpn Soc. Mech. Eng. A, 1996, 62A, 1605-1612 (in Japanese).10.1299/kikaia.62.1605 ↗
19. Yao Y., Shao T., and Wang X.: J. Xi'an Jiaotong Univ., 1994, 28, 45-50 (in Chinese).