journal article·2015-08

Study on fibre laser spot welding of TRIP980 steel

S. T. Wei, R. D. Liu, D. Lv, R. J. Xu, L. Lin, J. Y. Guo, X. F. Lu

Materials Science and Technology· Volume 31· Issue 11
Publisher page

Abstract

A 980 MPa transformation induced plasticity (TRIP) steel was fibre laser spot welded by different Argon (Ar) shielding conditions, laser power (1000 up to 2500 W) and defocusing distances (−8 up to +8 mm). The surface appearance, cross-section macrostructure, microstructure, hardness, tensile shear properties and fatigue properties of laser spot welds were evaluated. The results showed that the welds with Ar shielding had larger weld appearance and bonding sizes, better tensile shear properties compared with the welds without Ar shielding. With the increase in laser power, the laser welding mode changed from conduction to keyhole, which improved the bonding size and mechanical properties. The bonding size and mechanical properties increased in the order of defocusing distances of +8, −8, +4, −4 and 0 mm. During the fatigue tests of laser spot weld, the fusion zone pullout and sheet transverse fracture failure modes were observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Automobile and Home Appliance Steel Institute, Technology Center of Angang Steel, 63 Wuyi Road, Anshan 114009, China

References (26)

Show source-provided references
1. 10.1179/13621710322500563310.1179/136217103225005633 ↗
2. 10.1016/j.matdes.2011.08.00510.1016/j.matdes.2011.08.005 ↗
3. 10.1088/0022-3727/39/21/00910.1088/0022-3727/39/21/009 ↗
4. 10.1016/j.phpro.2010.08.02410.1016/j.phpro.2010.08.024 ↗
5. 10.1179/13621710222500429310.1179/136217102225004293 ↗
6. 10.1016/j.jmatprotec.2005.02.10410.1016/j.jmatprotec.2005.02.104 ↗
7. 10.1016/j.matdes.2012.04.01410.1016/j.matdes.2012.04.014 ↗
8. 10.1016/j.jmatprotec.2011.06.00910.1016/j.jmatprotec.2011.06.009 ↗
9. 10.1179/136217108X33629810.1179/136217108X336298 ↗
10. 10.1016/j.matdes.2009.03.04110.1016/j.matdes.2009.03.041 ↗
11. 10.1016/S0924-0136(99)00094-110.1016/S0924-0136(99)00094-1 ↗
12. 10.1016/j.jmatprotec.2010.01.02110.1016/j.jmatprotec.2010.01.021 ↗
13. 10.1179/1362171813Y.000000012010.1179/1362171813Y.0000000120 ↗
14. 10.1016/j.matdes.2006.10.01910.1016/j.matdes.2006.10.019 ↗
15. 10.1179/1362171814Y.000000021110.1179/1362171814Y.0000000211 ↗
16. 10.1016/j.matdes.2011.05.02410.1016/j.matdes.2011.05.024 ↗
17. 10.1179/174329307X21385510.1179/174329307X213855 ↗
18. 10.1179/174329308X27173310.1179/174329308X271733 ↗
19. 10.1016/j.jmatprotec.2006.02.02610.1016/j.jmatprotec.2006.02.026 ↗
20. 10.1016/j.matdes.2006.01.00910.1016/j.matdes.2006.01.009 ↗
21. 10.1016/j.matdes.2008.04.04310.1016/j.matdes.2008.04.043 ↗
22. 10.1016/j.optlaseng.2012.03.01010.1016/j.optlaseng.2012.03.010 ↗
23. 10.1016/0924-0136(91)90086-T10.1016/0924-0136(91)90086-T ↗
24. ‘Lasers and laser-related equipment – test methods for laser beam widths, divergence angles and beam propagation ratios’, ISO 11146, 2005.
25. 10.1016/j.jmatprotec.2008.11.01710.1016/j.jmatprotec.2008.11.017 ↗
26. 10.1016/j.matdes.2009.01.00210.1016/j.matdes.2009.01.002 ↗