Effect of restoration on hot ductility of high alloy and duplex stainless steels
Source abstract
Abstract
The effect of restoration on the hot ductility of two high alloy austenitic stainless steels and one ferritic–austenitic stainless steel was investigated by means of hot rolling and stress relaxation testing. Cracking tendency was assessed on the basis of the length of the cracks formed. It was found that the recrystallisation kinetics of the high alloy steels is relatively slow, so only partial softening can occur between rolling passes. In the ferritic–austenitic steel the restoration is fairly fast, so softening can be completed between hot rolling passes. The cracking tendency of the steels in the as cast condition increases with increasing pass strain and temperature, but it is negligible in rolling of the steels in the as wrought condition and also minimal in rolling of the as cast steels when using a small strain of 0.1 in the first pass. On the basis of these results, it can be concluded that the cracking problems in these steels are present in the cast structure only. The hot ductility of even partially recrystallised material is perfectly adequate. Hot ductility improves nearly independently of the degree of static recrystallisation, which indicates that ductility is controlled mainly by the grain or phase sizes, not by recrystallisation itself.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. 10.1179/imr.1982.27.1.110.1179/imr.1982.27.1.1 ↗
2. MUNDT R. · Arch. Eisenhiittenwes · 1983 · 54 · 291 —293
3. 10.1007/BF0281164310.1007/BF02811643 ↗
4. 10.2355/isijinternational1966.27.44610.2355/isijinternational1966.27.446 ↗
5. 10.1179/mst.1991.7.9.81810.1179/mst.1991.7.9.818 ↗
6. SANDBERG A. · Mater. Sci. TechnoL · 1986 · 2 · 917 — 932
7. 10.1179/mst.1995.11.6.55710.1179/mst.1995.11.6.557 ↗
8. KARJALAINEN L. P. · ISS Mech. Work. Steel Process. Conf Proc · 1995 · 33 · 861
9. 10.2355/isijinternational.36.72910.2355/isijinternational.36.729 ↗
10. J.L. STRUDEL: in ‘Physical metallurgy’, (ed. R. W. Cahn and P. Haasen), 1411-1486; 1983, Amsterdam, North-Holland.
11. TOWLE D. J. · Met. Sci · 1979 · 13 · 246 — 256
12. V. B. GINZBURG: ‘Steel-rolling technology, theory and practices’, 343–394; 1989, New York, Marcel Dekker.10.1201/9781466593510 ↗
13. 10.1179/mst.1991.7.2.13710.1179/mst.1991.7.2.137 ↗
14. IZA-MENDIA A. · MetalL Trans. A · 1998 · 29 · 110.1007/s11661-998-0205-z ↗
15. JIN Q. · ISS Mech. Work. Steel Process. Conf Proc · 1997 · 34 · 329
16. R. W. CAHN: in ‘Physical metallurgy’, (ed. R. W. Cahn and P. Haasen), 1596-1671, 1983; Amsterdam, North Holland.