Nitrogen diffusion in different microstructures of plasma nitrided CK45 steel
Source abstract
Abstract
In this study, the nitrogen diffusion in different microstructures of CK45 steel was studied. Different microstructures were achieved by different heat treatment cycles as annealing, normalising and quench tempering. After heat treatment, plasma nitriding was performed at 550°C temperature, nitriding times of 5 h, in a gas mixture containing 25 vol.-H2/75 vol.-N2 and DC pulsed plasma nitriding unit. The surface, cross-section and the thickness of diffusion and white layers of specimens were studied in terms of optical and scanning electron microscopy. Surface phases have been studied by X-ray diffraction analysis. Results showed that by normalising the samples, higher diffusion depths could be achieved and the white layer thickness would be also higher. Other results showed that core hardness of quench tempered specimens could decrease after plasma nitriding due to being subjected to nitriding process temperature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgy Institute Technical University of Clausthal, Clausthal-Zellerfeld, Germany
School of Materials Engineering Sahand University of Technology, Tabriz, Iran
School of Metallurgy and Materials Engineering University of Tehran, Tehran, Iran
Faculty of Mechanical Engineering Department of Materials Engineering, University of Tabriz, Tabriz, Iran
References (27)
Show source-provided references
1. 10.1016/j.apsusc.2008.11.04910.1016/j.apsusc.2008.11.049 ↗
2. 10.1016/j.apsusc.2009.05.04910.1016/j.apsusc.2009.05.049 ↗
3. 10.1016/j.apsusc.2007.05.08010.1016/j.apsusc.2007.05.080 ↗
4. 10.1016/S0169-4332(01)00208-210.1016/S0169-4332(01)00208-2 ↗
5. Terent'ev V.F. · Mechanika · 2007 · 2 · 12
6. 10.1016/S0257-8972(03)00460-210.1016/S0257-8972(03)00460-2 ↗
7. 10.1016/j.surfcoat.2010.07.11510.1016/j.surfcoat.2010.07.115 ↗
8. Abbasi N., and Aghajani H. ‘Effect of grain size on diffusion of nitrogen in heat treated CK45 plain carbon steel’, Proc. AMPT, Turkey, 2012.
9. 10.1016/j.vacuum.2011.04.02010.1016/j.vacuum.2011.04.020 ↗
10. 10.1016/j.wear.2012.04.00110.1016/j.wear.2012.04.001 ↗
11. Rivolta B., and Canale L. ‘Current and future advances in materials development for tribological applications, automotive lubricants and testing’, in ‘Automotive lubricants and testing’, (ed. Totten G. E., and Tung S. C.); 2012, Hoboken, NJ, ASTM International.10.1520/MNL6220121209819 ↗
12. 10.1016/S0142-1123(00)00087-610.1016/S0142-1123(00)00087-6 ↗
13. 10.1016/j.vacuum.2006.01.01310.1016/j.vacuum.2006.01.013 ↗
14. 10.1179/sur.1985.1.2.13110.1179/sur.1985.1.2.131 ↗
15. 10.1016/j.corsci.2003.09.01510.1016/j.corsci.2003.09.015 ↗
16. 10.1016/S0257-8972(98)00793-210.1016/S0257-8972(98)00793-2 ↗
17. 10.1016/S0010-938X(03)00188-410.1016/S0010-938X(03)00188-4 ↗
18. 10.1016/j.surfcoat.2004.06.03710.1016/j.surfcoat.2004.06.037 ↗
19. 10.1179/sur.1991.7.1.4510.1179/sur.1991.7.1.45 ↗
20. 10.1016/S0042-207X(00)00250-510.1016/S0042-207X(00)00250-5 ↗
21. Lebrun J.P. · Surf. Eng. · 2002 · 18 · 423
22. 10.1016/j.vacuum.2006.03.01010.1016/j.vacuum.2006.03.010 ↗
23. 10.1016/j.surfcoat.2006.03.05310.1016/j.surfcoat.2006.03.053 ↗
24. 10.1016/j.vacuum.2005.01.00210.1016/j.vacuum.2005.01.002 ↗
25. 10.1023/A:100454811254710.1023/A:1004548112547 ↗
26. 10.1016/j.msea.2007.11.08110.1016/j.msea.2007.11.081 ↗
27. 10.1016/j.cirp.2007.05.01610.1016/j.cirp.2007.05.016 ↗