Comparison of thermal fatigue behaviour and microstructure of different hot work tool steels processed by biomimetic couple laser remelting process
Source abstract
Abstract
For comparing the enhancement degree of the thermal fatigue behaviour of different hot work tool steels processed by laser remelting, three kinds of hot work tool steels (HHD, H13 and HD steels) were selected to investigate the effect of biomimetic coupled laser remelting process on the thermal fatigue behaviour. The results showed that biomimetic non-smooth samples had better thermal fatigue behaviour compared to untreated samples, the biomimetic non-smooth sample of HHD had the optimum thermal fatigue behaviour. Moreover, before and after thermal fatigue testing, the microhardness and microstructure of biomimetic non-smooth units and parent materials have been investigated. The results showed that biomimetic non-smooth sample of HHD had the highest resistance of thermal cycles softening among the biomimetic non-smooth samples. The microstructures observation indicated that the microstructures of parent materials were a substantial amount of the carbides coarsening while the microstructures of biomimetic non-smooth units were coarse grains after thermal fatigue test.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Adhesion, Friction, and Surface Interactions · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Key Lab of Automobile Materials The Ministry of Education, Jilin University, Changchun 130025, China
The Key Lab of Terrain Machinery Bionics Engineering The Ministry of Education, Jilin University, Changchun 130025, China
References (26)
Show source-provided references
1. 10.1073/pnas.96.25.1420810.1073/pnas.96.25.14208 ↗
2. 10.1038/3510210810.1038/35102108 ↗
3. 10.1006/anbo.1997.040010.1006/anbo.1997.0400 ↗
4. 10.1038/3501653510.1038/35016535 ↗
5. 10.1016/S1672-6529(08)60016-510.1016/S1672-6529(08)60016-5 ↗
6. 10.1007/s00348005040010.1007/s003480050400 ↗
7. Tong J · 200 · 265 · 1114
8. 10.1016/S0022-4898(03)00012-010.1016/S0022-4898(03)00012-0 ↗
9. 10.1016/S1672-6529(09)60215-810.1016/S1672-6529(09)60215-8 ↗
10. 10.1016/j.ijfatigue.2008.03.02310.1016/j.ijfatigue.2008.03.023 ↗
11. 10.1016/j.matdes.2010.07.01910.1016/j.matdes.2010.07.019 ↗
12. 10.1016/j.msea.2005.09.04210.1016/j.msea.2005.09.042 ↗
13. 10.1016/j.ijfatigue.2008.07.00310.1016/j.ijfatigue.2008.07.003 ↗
14. 10.1016/j.msea.2006.06.07210.1016/j.msea.2006.06.072 ↗
15. 10.1016/j.apsusc.2008.01.09110.1016/j.apsusc.2008.01.091 ↗
16. 10.1016/j.surfcoat.2004.04.05310.1016/j.surfcoat.2004.04.053 ↗
17. 10.2355/isijinternational.44.110310.2355/isijinternational.44.1103 ↗
18. Callister WD: ‘Fundamentals of materials science and engineering’, 5th edn, S-255; 2000, Beijing, Chemical Industry Press.
19. Sui HL: ‘Microstructures and properties of new type high-Cr hot working die steel’, PhD thesis, JiLin University, Changchun, China, 2006.
20. Klug HP, Alexander LE: ‘X-ray diffraction procedures’, 2nd edn, 618; 1974, New York, Wiley.
21. 10.1016/S0924-0136(97)00244-610.1016/S0924-0136(97)00244-6 ↗
22. 10.1007/s00170-009-2467-z10.1007/s00170-009-2467-z ↗
23. 10.1179/02670830110151015910.1179/026708301101510159 ↗
24. 10.1016/j.optlaseng.2010.12.00810.1016/j.optlaseng.2010.12.008 ↗
25. 10.1016/S0257-8972(01)01452-910.1016/S0257-8972(01)01452-9 ↗
26. 10.1007/s11661-997-0017-610.1007/s11661-997-0017-6 ↗