journal article·2010-04

Study on Young's modulus and microhardness of carbon nanotubes reinforced copper nanocomposite

R. G. Patil, V. Chatpalli, K. R. Kannan

Materials Science and Technology· Volume 26· Issue 4
Publisher page

Abstract

Carbon nanotubes (CNTs) were discovered by Iijima in 1991 as the fourth form of carbon. Carbon nanotubes are the ultimate form of the carbon fibre because of its high Young's modulus in the order of 1 TPa, which is very useful for load transfer in nanocomposites. In the present work, CNT/Cu nanocomposites were fabricated by the powder metallurgy technique, and after extrusion of the nanocomposites, bright field transmission electron microscopic studies were carried out. From the transmission electron microscopic images obtained, a novel method of ascertaining the Young's modulus of multiwalled CNTs is worked out in the present paper, which turns out to be 0·94 TPa, which is consistent with experimental results. Furthermore, an attempt is made to investigate the microhardness of copper by reinforcing it with multiwalled CNTs. There is an increase in hardness by twofold in CNT/Cu nanocomposites as compared to pure Cu matrix. This is due to high relative density, even distribution of CNTs and proper bonding at CNT/Cu interfaces.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Aluminum Alloys Composites Properties · Nanotechnology research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical EngineeringPeople Education Society Institute of Technology (PESIT), 100 feet Ring Road, BSK 3rd stage, Bangalore 560 085, India

SSCUIndian Institute of Science (IISc), Bangalore, India

References (14)

Show source-provided references
1. 10.1038/354056a010.1038/354056a0 ↗
2. Harris P. J. ‘Carbon nanotubes and related structures’; 2004, UK, Cambridge University Press.
3. 10.1038/381678a010.1038/381678a0 ↗
4. 10.1007/BF0143676910.1007/BF01436769 ↗
5. 10.1103/PhysRevLett.80.450210.1103/PhysRevLett.80.4502 ↗
6. 10.1103/PhysRevLett.79.129710.1103/PhysRevLett.79.1297 ↗
7. Li Q. Q. · Jpn J. Appl. Phys. B · 1997 · 36 · 50110.1143/JJAP.36.L501 ↗
8. Reed-Hill R. E., and Abbaschian R. ‘Physical metallurgy principles’, 3rd edn; 1991, Thomson Publications.
9. Zhang X. J. · Prog. Mater. Sci · 1990 · 4 · 23
10. 10.1016/j.intermet.2004.07.02910.1016/j.intermet.2004.07.029 ↗
11. 10.1016/S0925-8388(03)00415-810.1016/S0925-8388(03)00415-8 ↗
12. Doherty R. D., and Cantor B. ‘Stability of microstructure in metallic systems’; 1997, Cambridge, Cambridge University Press.
13. 10.1007/s12034-008-0032-210.1007/s12034-008-0032-2 ↗
14. Kyung T. K., Seung C., and Soon H.: Mater. Sci. Eng. A, 2007, A449-451,46–50.