Creep behaviour of cast TiAl based intermetallics
Source abstract
Abstract
Constant load tensile creep tests were carried out on the cast TiAl based intermetallics Ti–47 Al–2Mn, Ti–47 Al–2Zr, and Ti–48Al (at.-%), prepared by plasma arc melting. Two microstructural conditions dependent on heat treatment were evaluated as follows: a fully lamellar (FL) scheme consisting of a fully transformed coarse lamellar structure with α2 laths plus γ laths within the grain interiors; and a duplex scheme consisting of fine equiaxed grains of γ with α2/γ lamellae. The steady state creep behaviour of both microstructural conditions, for each composition, was studied under stresses of 70–300 MN m−2 in the temperature range 700–900°C. The microstructure was found to have a pronounced influence on the creep resistance. The FL microstructure exhibited superior creep resistance to the duplex microstructure. At temperatures and stress levels at which direct comparisons can be made, the steady state creep rates of the FL structures are an order of magnitude lower than those of the duplex structure. The apparent creep activation energies and stress exponents were measured for both microstructural conditions for each composition. The temperature and stress dependence of the steady state creep rate of both microstructures can be described by the power law creep equation, suggesting dislocation motion as the operative deformation mechanism.MST/1962
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. 10.1016/0001-6160(89)90162-410.1016/0001-6160(89)90162-4 ↗
2. KIM Y. W. · J. Met., · 1989 · 42 · 24
3. 10.1007/BF0316182210.1007/BF03161822 ↗
4. 10.1016/0921-5093(91)90360-Y10.1016/0921-5093(91)90360-Y ↗
5. 10.1016/0921-5093(91)90725-310.1016/0921-5093(91)90725-3 ↗
6. 10.1007/BF0265681010.1007/BF02656810 ↗
7. 10.1007/BF0266238410.1007/BF02662384 ↗
8. 10.1016/0921-5093(89)90840-X10.1016/0921-5093(89)90840-X ↗
9. 10.1007/BF0071408710.1007/BF00714087 ↗
10. 10.1016/0921-5093(92)90232-P10.1016/0921-5093(92)90232-P ↗
11. 10.1016/0921-5093(92)90233-Q10.1016/0921-5093(92)90233-Q ↗
12. CHOL C. W. · J. Korea Foundryrnen Soc., · 1992 · 12 · 139
13. W. Y. · J. Met., · 1991 · 44 · 40
14. T. G. LANGDON: ‘Dislocations and properties of real materials’, 221; 1985, London, The Institute of Metals.
15. 10.1007/978-3-642-82961-110.1007/978-3-642-82961-1 ↗
16. Ho W.C. · Metall. Trans., · 1990 · 21 · 64110.1007/BF02671935 ↗
17. J. G. · Metall. Trans., · 1990 · 21 · 165510.1007/BF02672580 ↗
18. 10.1007/BF0264662310.1007/BF02646623 ↗