journal article·2011-01

Effects of TIG surface treating on microstructural characteristics and mechanical properties of Al2O3–TiB2 coating by APS

H. C. Cheng, Z. X. Li, Y. W. Shi

Materials Science and Technology· Volume 27· Issue 1
Publisher page

Abstract

The pulsed DC tungsten inert gas (TIG) method was employed to post-spray treat an electroconductive Al2O3–TiB2 coating by atmosphere plasma spraying (APS) Al2O3–30 wt-TiB2 powder. The microstructure and mechanical properties of the coatings before and after treatment were comparatively investigated by scanning electron microscopy, laser scanning confocal microscopy, X-ray diffraction, microhardness tester and block on ring wear tester. It was detected that the treated coating presented a two layer structure consisting of the remelted zone and the sintered zone, which was comprised of TiB2 and single α-Al2O3; surface roughness of the treated coating exhibited a remarkable decrease while microhardness and wear resistance showed a significant increase. These experimental results could be ascribed to the effect of high heat input and discharge plasma during the pulsed DC TIG treating.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Material Science and Engineering Beijing University of Technology, Beijing 100022, China

References (21)

Show source-provided references
1. 10.1016/0955-2219(89)90005-810.1016/0955-2219(89)90005-8 ↗
2. 10.1016/0955-2219(92)90086-S10.1016/0955-2219(92)90086-S ↗
3. 10.1016/j.ijrmhm.2005.05.00610.1016/j.ijrmhm.2005.05.006 ↗
4. 10.1016/S0263-4368(98)00063-810.1016/S0263-4368(98)00063-8 ↗
5. 10.1179/02670840110151762910.1179/026708401101517629 ↗
6. 10.1179/02670840222500530410.1179/026708402225005304 ↗
7. Seitz K., and Hiltmann F.: in ‘Light metals 1998’, (ed. Welch B.), 379–383; 1998, Warrendale, PA, TMS.
8. 10.1016/j.wear.2005.07.00610.1016/j.wear.2005.07.006 ↗
9. Pawlowski L. ‘The science and engineering of thermal spray coatings’, 5–9; 1995, New York, NY, Jone Wiley & Sons.
10. 10.1016/j.apsusc.2005.02.08810.1016/j.apsusc.2005.02.088 ↗
11. 10.1016/j.surfcoat.2005.01.10610.1016/j.surfcoat.2005.01.106 ↗
12. 10.1016/j.surfcoat.2006.07.23410.1016/j.surfcoat.2006.07.234 ↗
13. 10.1111/j.1151-2916.1985.tb09637.x10.1111/j.1151-2916.1985.tb09637.x ↗
14. 10.1007/BF0036336310.1007/BF00363363 ↗
15. 10.1179/026708408X33412210.1179/026708408X334122 ↗
16. 10.2109/jcersj.103.99610.2109/jcersj.103.996 ↗
17. 10.1016/j.ceramint.2003.11.01510.1016/j.ceramint.2003.11.015 ↗
18. 10.1016/j.jmatprotec.2003.12.02710.1016/j.jmatprotec.2003.12.027 ↗
19. 10.1016/S0257-8972(02)00564-910.1016/S0257-8972(02)00564-9 ↗
20. Deng S. J. ‘Advanced ceramic coatings’, 206; 2004, Beijing, Chemical Industry Press.
21. 10.1016/j.surfcoat.2007.04.05710.1016/j.surfcoat.2007.04.057 ↗