Microstructure and mechanical properties of hot rolled Fe–40 at-%Al intermetallic alloys with Zr and B addition
Source abstract
Abstract
The microstructure and mechanical properties of hot rolled Fe–40 at-%Al based intermetallic alloys, with 0·1 at-%Zr and different additions of B (varying from 0·01 to 0·1 at-%), are characterised. The additions of Zr and B improve tensile properties at room and elevated temperatures. Increasing B content is also associated with a number of other effects. First, the fracture mode changes from intergranular decohesion to cleavage, which correlates with significant increases in the fracture toughness. Second, there is a certain stabilisation of dislocations arranged in parallel systems of slip bands, as shown by transmission electron microscopy. Numerous complex stacking faults on {100} planes are also observed in the alloy with the highest B content. Third, B is found to modify the formation of second phase particles; such particles (coarse and fine) are analysed by energy dispersive X-ray spectroscopy and electron energy loss spectrometry to obtain compositional information.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Nuclear Sciences and Physical Engineering, Department of Materials, Czech Technical University in Prague, Trojanova 13, 120 00 Prague 2, Czech
Faculty of Mathematics and Physics, Department of Materials Physics, Charles University, 121 16 Prague 2, Czech
School of Basic Sciences, Interdisciplinary Centre for Electron Microscopy, Ecole Polytechnique Fédérale de Lausanne, Lausanne CH–1015, Switzerland
References (23)
Show source-provided references
1. Maziasz PJ, Goodwin GM, Alexander DJ, Viswanathan S:in ‘Nickel and iron aluminides: processing, properties and applications’(, Deevi S C, et al.), 157–176; 1997, Materials Park, OH, ASM International.
2. 10.1016/0921-5093(90)90003-L10.1016/0921-5093(90)90003-L ↗
3. 10.1016/0956-7151(90)90209-Y10.1016/0956-7151(90)90209-Y ↗
4. 10.1016/0956-716X(90)90343-F10.1016/0956-716X(90)90343-F ↗
5. 10.1016/S0966-9795(03)00135-310.1016/S0966-9795(03)00135-3 ↗
6. 10.1016/j.intermet.2004.03.00410.1016/j.intermet.2004.03.004 ↗
7. 10.1016/S0966-9795(97)00063-010.1016/S0966-9795(97)00063-0 ↗
8. 10.1016/S0921-5093(02)00108-910.1016/S0921-5093(02)00108-9 ↗
9. 10.1016/j.intermet.2006.03.00610.1016/j.intermet.2006.03.006 ↗
10. 10.3139/146.11004110.3139/146.110041 ↗
11. 10.4028/www.scientific.net/MSF.567-568.34910.4028/www.scientific.net/MSF.567-568.349 ↗
12. 10.1016/j.msea.2006.01.17310.1016/j.msea.2006.01.173 ↗
13. 10.1016/j.intermet.2010.01.03810.1016/j.intermet.2010.01.038 ↗
14. 10.1016/j.intermet.2009.12.02410.1016/j.intermet.2009.12.024 ↗
15. Toth LE: ‘Refractory metals. Transition metal carbides’, vol. 7; 1971, New York, Academic Press.
16. 10.1016/S1359-6454(01)00140-910.1016/S1359-6454(01)00140-9 ↗
17. 10.1016/S1359-6462(99)00106-210.1016/S1359-6462(99)00106-2 ↗
18. Cieslar M: Proc. 5th Discussion Meet. on ‘The development of innovative iron aluminides’, Prague, Czech, September 2009, Paper 4, Charles University Press.
19. 10.1016/S0966-9795(97)00033-210.1016/S0966-9795(97)00033-2 ↗
20. 10.1016/j.intermet.2004.02.03210.1016/j.intermet.2004.02.032 ↗
21. 10.1016/j.engfracmech.2006.08.02710.1016/j.engfracmech.2006.08.027 ↗
22. 10.1016/0921-5093(95)10041-510.1016/0921-5093(95)10041-5 ↗
23. 10.1016/j.intermet.2009.02.00810.1016/j.intermet.2009.02.008 ↗