Microstructure and properties of laser produced Ti–AI functionally gradient clad
Source abstract
Abstract
The microstructure and oxidation and erosion resistance of three laser clad layers, namely, Ti−14.5 Al−3.7V, Ti−17 Al−3.7 V, and Ti−30 Al−2.8 V (all wt-%), have been investigated. Using a continuous wave CO 2 laser and powder feed technique, three fully overlapping clad layers were deposited vertically to produce a Ti−Al functionally gradient coating on a commercial purity Ti substrate. The laser processing parameters were: 1.8 kW laser power, 3 mm laser beam diameter, 5.3 mm s −1 traverse speed, and 4.2 g min −1 powder feedrate. The results of the microstructural examination showed disordered martensite α' in the first layer, ordered martensite α' 2 in the second layer, and dendrites of α 2 with interdendritic regions of α 2 +γ in the third layer. Oxidation tests showed a significant improvement of oxidation resistance with increasing Al content. The erosion resistance of the third layer was inferior to that of the substrate, whereas the second layer exhibited superior resistance compared with the substrate
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. 10.1016/S0036-9748(88)80006-110.1016/S0036-9748(88)80006-1 ↗
2. 10.1007/BF0035622510.1007/BF00356225 ↗
3. 10.1007/BF0074411010.1007/BF00744110 ↗