journal article·2008-03

Using matrix methods to characterise the evolution of deformation induced surface roughness in aluminium sheet

M. R. Stoudt, J. B. Hubbard, S. A. Janet

Materials Science and Technology· Volume 24· Issue 3
Publisher page

Abstract

The deformation induced surface roughness of polycrystalline AA6022-T4 aluminium was evaluated with two different analysis protocols. The first determined the rms roughness Rq with linear roughness profiles to be consistent with literature practice. When plotted against strain, the correlation coefficient indicated an excellent linear fit; however, further analysis revealed the roughening behaviour did not support the literature consensus of a linear relationship between plastic strain and Rq. The second determined Rq by matrix methods. This evaluation demonstrates that when Rq data are acquired via linear profiles, they are strongly influenced by correlations. Conversely, matrix based methods sample all of the data and are unaffected by the presence of correlations. Eliminating the correlations in the profile data produced the same Rq behaviour obtained with the matrix methods. An Rq behaviour that exhibits saturation is more representative of the complexities observed in the plastic deformation process of a polycrystal.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Surface Roughness and Optical Measurements · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. 10.1299/jsme1958.28.25110.1299/jsme1958.28.251 ↗
2. ‘ASME designation B 46.1-2002: surface texture (surface rough-ness, waviness and lay)’, 98; 2002, New York, The American Society of Mechanical Engineers.
3. Bellman R. ‘Introduction to matrix analysis’, 403; 1976, New York, McGraw-Hill.
4. Bendat J. S., and Piersol A. G. ‘Random data —analysis and measurement procedures’, 566; 1986, New York, John Wiley&Sons.
5. 10.1080/1478643060100388210.1080/14786430601003882 ↗
6. 10.1115/1.290419610.1115/1.2904196 ↗
7. 10.1243/PIME_PROC_1995_209_097_0210.1243/PIME_PROC_1995_209_097_02 ↗
8. 10.1016/0043-1648(94)90127-910.1016/0043-1648(94)90127-9 ↗
9. Feller W. ‘An introduction to probability theory and its applications’, 670; 1971, New York, John Wiley & Sons.
10. Frost H. J., and Ashby M. F. ‘Deformation mechanism maps’, 166; 1982, Oxford, Pergamon.
11. 10.1299/jsme1958.29.133710.1299/jsme1958.29.1337 ↗
12. Kramer D. E., Savage M. F., and Levine L. E.: Acta Mater. 2005, 53, 4655–4664.10.1016/j.actamat.2005.06.019 ↗
13. Lancaster P., and Tismenetsky M. ‘The theory of matrices’; 1985, New York, Academic Press.
14. Lange K. ‘Applied probability’, 294; 2003, New York, Springer-Verlag.
15. Levine L. E.: Personal communication, NIST, Gaithersburg, MD, USA.
16. Liu J. T., and Stoudt M. R.: Personal communication, NIST, Gaithersburg, MD, USA.
17. Rhee H. · Optics · 2005 · 7
18. 10.1243/095440500151788310.1243/0954405001517883 ↗
19. 10.1299/jsmea.44.49910.1299/jsmea.44.499 ↗
20. Stoudt M. R., and Hubbard J. B.: Acta Mater. 2005, 53, 4293–4304.10.1016/j.actamat.2005.05.038 ↗
21. 10.1007/s11661-002-0273-410.1007/s11661-002-0273-4 ↗
22. Stout K. J. (ed.): ‘Three dimensional surface topography: measurement, interpretation and applications’, 236; 1994, London, Penton Press.
23. Taylor B. N., and Kuyatt C. E. ‘Guidelines for evaluating and expressing the uncertainty of NIST measurement results’, NIST Technical Note 1297, NIST, Gaithersburg, MD, USA, 1994.10.6028/NIST.TN.1297 ↗
24. Thomas T. R. ‘Rough surfaces’, 278; 1999, London, Imperial College.
25. VanderVoort G. F. ‘Metallography principles and practice’, 752; 1999, Materials Park, OH, ASM International.
26. Vorburger T. V., Rhee H. G., Renegar T. B., Song J. F., and Zheng A.: Int. J. Adv. Manufact. Technot, 2007.
27. 10.1115/1.136359610.1115/1.1363596 ↗