journal article·1988-04

Effect of thermomechanical processing on superplasticity in Ti–Al–Mo–Zr alloy

A. Dutta, N. C. Birla

Publisher page

Abstract

Superplasticity in terms of total tensile elongation was studied in a titanium alloy of nominal composition Ti–6·5Al–3·3Mo–1·6Zr (wt-%) for three strain rates (1·04 × 10−3, 2·1 × 10−3, and 4·2 × 10−3s−1) and in the temperature range 1123–1223 K for microstructures obtained by different processing schedules. Fine equiaxed microstructure with a low aspect ratio of 1·15 was accomplished in this alloy by combining two types of deformation. While the first step consists of heavy deformations for refining and intermixing the phases, a second step, consisting of light homogeneous reductions in several stages, was necessary to remove the banding that developed during the first step. The resulting microstructure underwent enormous tensile elongation (1700–1725%), even under relatively high strain rates (1·04 × 10−3 and 2·1 × 10−3s−1), making this alloy most suitable for commercial superplastic forming. The present investigation also revealed that the usual sheet rolling practice of heavy reductions to refine the microstructure leads to localised banding which could not be removed by annealing; therefore, the tensile elongation was limited to 770% only. The reason for this may be attributed to the resistance in grain boundary sliding and rotation encountered in microstructures with shear bands and grains with high aspect ratio. Strain enhanced grain growth was also greater in these microstructures.MST/555
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. DUTTA A. · Indian Inst. Met. · 1987 · 40 · 195
2. F. H. FROES, C. F. YOLTON, J. C. CHESTNUTT, and C. H. HAMILTON: ‘Forging and properties of aerospace materials’, 371-398; 1978, London, The Metals Society.
3. F. HALLAM, K. PARKER, and P. J. POSTANS: ‘Forging and properties of aerospace materials’, 217-224; 1978, London, The Metals Society.
4. 10.1007/BF0281763410.1007/BF02817634 ↗
5. S. P. AGARWAL, R. R. BOYER, and E. D. WEISERT: in ‘Titanium science and technology’, (ed. H. Kimura and O. Izumi), 1057-1066; 1980, New York, American Institute of Mining and Metallurgical Engineers.
6. 10.1007/BF0281166510.1007/BF02811665 ↗
7. DUTTA A. · Trans. Indian Inst. Met. · 1983 · 36 · 169
8. HILLIARD J. E. · Met. Frog. · 1969 · 85 · 99
9. WEISS I. · in ‘Titanium science and technology’, (ed. G. Lutjering et al.), 1503-1510; 1985, Oberursel, Deutsche Gesellschaft rtir Metallkunde