journal article·2005-02

Microstructure and strength of TiAl/steel joint induction brazed with Ag-Cu-Ti filler metal

J.-C. Feng, Y.-L. Li, P. He, H.-J. Liu, J.-C. Yan

Materials Science and Technology· Volume 21· Issue 2
Publisher page

Abstract

Intermetallic TiAl was induction brazed to steel in an induction furnace with Ag-Cu-Ti filler metal at 1143 K for 0·2–2·4 ks. Microstructural analysis indicates that Ti, Al, and C atoms in base metal diffuse to the interface and react strongly with the filler metal during brazing. The interface structure of the joint can be divided into three distinct zones: the reaction layer near TiAl, composed of Cu-Al-Ti compounds and Ag based solid solutions; the central zone of the interface, consisting of Ag based solid solutions in which Ag-Cu eutectic phases are dispersed; a TiC reaction layer adjacent to the steel. The relationship between brazing parameters and tensile strength of the joints is discussed, and the optimum induction brazing parameters obtained. When brazed at 1143 K for 0.9 ks, the tensile strength of the joint is 298 MPa.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. 10.1016/S1044-5803(02)00319-410.1016/S1044-5803(02)00319-4 ↗
2. 10.1016/S0966-9795(03)00077-310.1016/S0966-9795(03)00077-3 ↗
3. 10.1016/S0966-9795(98)00004-110.1016/S0966-9795(98)00004-1 ↗
4. 10.1016/S1359-6454(02)00606-710.1016/S1359-6454(02)00606-7 ↗
5. Peng H. · J. Harbin Inst. Technot · 2000 · 7 · 78
6. Feng J.-C. · Chin. J. Nonferrous Met · 2003 · 13 · 162
7. 10.1179/02670830222500593610.1179/026708302225005936 ↗
8. 10.1016/S1359-6462(00)00360-210.1016/S1359-6462(00)00360-2 ↗
9. 10.1016/S0966-9795(98)00060-010.1016/S0966-9795(98)00060-0 ↗