Preparation of FeAl–Al2O3 nanocomposite via mechanical alloying and subsequent annealing
Source abstract
Abstract
FeAl–Al2O3 nanocomposite was successfully synthesised via milling of Fe2O3 and Al powders mixture at nominal room temperature. Effects of the milling time and annealing were investigated. X-ray diffraction and transmission electron microscopy were used to characterise the structure of the milled and annealed powders. The morphological evolutions were studied by scanning electron microscopy. Results showed that two mechanically induced self-sustaining reactions took place, simultaneously to form a product of nanocrystalline mixture of Al2O3 and FeAl powders. This nanocomposite was also synthesised during annealing of the milled powder at 1000°C. Mean grain sizes of 28 and 24 nm were obtained for FeAl and Al2O3 after annealing of the 360 min milled powders at 1000°C respectively. Maximum microhardness of 11 GPa was procured at the end of milling (3000 min). Scanning electron microscopy images showed very fine particles with the mean size of 30 μm at the end of milling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Ceramic DepartmentMaterials and Energy Research Centre, Tehran, Iran
Ceramic DepartmentMaterials and Energy Research Centre, PO Box 31787/316, Karaj, Iran;, Email: m_zakeri@merc.ac.ir
Materials Engineering DepartmentBahonar University of Kerman, Kerman, Iran
References (25)
Show source-provided references
1. 10.1557/JMR.1991.177910.1557/JMR.1991.1779 ↗
2. Vedula K.: TeAl and Fe3A1’, in Intermetallic compounds: principles and practice’, (ed.Westbrook J. H.), vol. 2; 1994, West Sussex, John Wiley and Sons Ltd.
3. 10.1016/0966-9795(94)90001-910.1016/0966-9795(94)90001-9 ↗
4. 10.1179/imr.1997.42.5.18110.1179/imr.1997.42.5.181 ↗
5. 10.1016/S0966-9795(97)00033-210.1016/S0966-9795(97)00033-2 ↗
6. 10.1016/S0921-5093(02)00108-910.1016/S0921-5093(02)00108-9 ↗
7. 10.1016/S0966-9795(97)00062-910.1016/S0966-9795(97)00062-9 ↗
8. 10.1016/S0966-9795(97)00063-010.1016/S0966-9795(97)00063-0 ↗
9. Ajayan Pulickel M., Schadler L. S., Braun P. V., and Keblinski P. ‘Nanocomposite science and technology'; 2004, Weinheim, Wiley-VCH.10.1002/3527602127 ↗
10. 10.1016/0956-716X(95)00301-B10.1016/0956-716X(95)00301-B ↗
11. 10.1111/j.1151-2916.1971.tb12287.x10.1111/j.1151-2916.1971.tb12287.x ↗
12. 10.1007/BF0035288510.1007/BF00352885 ↗
13. 10.1007/s10853-008-2996-010.1007/s10853-008-2996-0 ↗
14. 10.1016/j.msea.2006.05.11210.1016/j.msea.2006.05.112 ↗
15. 10.1007/s10853-007-2347-610.1007/s10853-007-2347-6 ↗
16. 10.1016/j.msea.2008.05.00810.1016/j.msea.2008.05.008 ↗
17. Suryanarayana C. · Mater. Sc · 2001 · 1
18. 10.1007/s10853-007-2123-710.1007/s10853-007-2123-7 ↗
19. 10.1016/j.jallcom.2007.11.12310.1016/j.jallcom.2007.11.123 ↗
20. 10.1142/S021797920804815210.1142/S0217979208048152 ↗
21. Osso D. · J. Mater. Sc
22. 10.4028/www.scientific.net/MSF.360-362.23510.4028/www.scientific.net/MSF.360-362.235 ↗
23. Cullity B. D. ‘Elements of X-ray diffraction’, 2nd edn, Chapter 1, 1-32; 1977, Reading, MA, Addison-Wesley Publishing.
24. Kubaschewski O. ‘Materials thermochemistry’, 6th edn; 1993, Oxford, Pergamon Press.
25. Klug H. P., and Alexander L. ‘X-ray diffraction procedures for polycrystalline and amorphous materials’, 2nd edn; 1974, New York, Wiley.