journal article·2006-01

Effect of mixed mode I/III loading on fracture toughness of 7010 aluminium alloy

K. S. S. Eswar Raju, A. K. Mukhopadhyay, S. V. Kamat

Materials Science and Technology· Volume 22· Issue 1
Publisher page

Abstract

The effect of mixed mode I/III loading on the fracture toughness of 7010 aluminium alloy plate was investigated in the peak aged (T6) and overaged (T73) temper conditions. The fracture toughness of 7010 Al alloy was found to remain more or less unchanged with increasing mixed mode I/III loading for both aging tempers. The fracture, in both T6 and T73 tempers, occurred predominantly by a transgranular ductile mechanism of void nucleation, growth and coalescence under mode I as well as mixed mode I/III loading. Primary void formation at brittle intermetallic inclusions and their subsequent coalescence was determined to be the most important step in the fracture process. This coupled with the nature of the stress field ahead of the crack tip under mixed mode I/III loading was then used to explain the insignificant effect of mixed I/III loading on the fracture toughness in 7010 aluminium alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Aerospace Materials Specifications, DTD 5636, DTD 5120 and DTD5130, Ministry of Defence, UK, July 1989.
2. Reynolds M. A., Fitz Simmons P. E., and Harris J. C.: Proc. Symp. ‘Aluminum alloys in aircraft industry’, 1976, Technocopy Ltd, p. 115.
3. 10.1016/0013-7944(71)90032-410.1016/0013-7944(71)90032-4 ↗
4. 10.1016/0013-7944(80)90093-410.1016/0013-7944(80)90093-4 ↗
5. 10.1007/BF0266855510.1007/BF02668555 ↗
6. 10.1016/0036-9748(89)90444-410.1016/0036-9748(89)90444-4 ↗
7. 10.1007/BF0264699910.1007/BF02646999 ↗
8. 10.1016/0956-7151(91)90208-I10.1016/0956-7151(91)90208-I ↗
9. 10.1007/BF0267557610.1007/BF02675576 ↗
10. 10.1007/BF0267077010.1007/BF02670770 ↗
11. 10.1016/1359-6454(95)00223-510.1016/1359-6454(95)00223-5 ↗
12. 10.1016/S1359-6454(98)00170-010.1016/S1359-6454(98)00170-0 ↗
13. 10.1179/02670830422501195510.1179/026708304225011955 ↗
14. 10.1007/s11661-000-0195-y10.1007/s11661-000-0195-y ↗
15. di Russo E.: Mater. Set Technot, 1986, 4, 37–48.10.3366/inr.1986.0004 ↗
16. 10.1007/BF0267126310.1007/BF02671263 ↗
17. 10.1007/BF0264335010.1007/BF02643350 ↗
18. 10.1007/s11661-997-0200-910.1007/s11661-997-0200-9 ↗
19. Specifications Aerospace Materials, American National Standards,1978, 4197A.
20. Mukhopadhyay A. K., Reddy G. M., Prasad K. S., Kamat S. V., Dutta A., and Mondal C.: in ‘Proc. J. T. Staley Honorary Symp. on aluminium alloys’, Indianapolis, USA, Advances in the Metallurgy of Aluminium Alloys, (ed.Tiryakioglu M.), 63-71; 2001, Metals Park, OH, ASM International.
21. ASTM E- 8, Annual Book of ASTM Standards, American Society of Testing and Materials, Philadelphia, PA, V. 3. 01, 2004,62–85.
22. ASTM E- 399, Annual Book of ASTM Standards, American Society of Testing and Materials, Philadelphia, PA, V. 3. 01, 2004,461–494.
23. Tada H., Paris P. C., and Irwin C. R.: in ‘Stress analysis of cracks handbook’, 2). 24; 1973, Hellertown, PA, Del Research Corp.
24. Kumar S., and Mukhopadhyay A. K.: Mater. Set Eng. A., to be published.
25. 10.1016/0956-716X(91)90443-510.1016/0956-716X(91)90443-5 ↗
26. 10.1007/BF0096397510.1007/BF00963975 ↗
27. Wilshaw T. R., Rau C. A., and Tetelman A. S. : Eng. Fract. Mech., 1, 1968,191–202.10.1016/0013-7944(68)90025-8 ↗
28. 10.1007/BF0264408010.1007/BF02644080 ↗
29. 10.1016/0022-5096(85)90005-510.1016/0022-5096(85)90005-5 ↗
30. 10.1016/0022-5096(82)90027-810.1016/0022-5096(82)90027-8 ↗
31. Wang K. C., and Luo X. F.: in ‘Advances in fracture research’,Vol. 1, (ed. Salama K.), 371; 1989, Oxford, Pergamon.
32. 10.1016/0022-5096(90)90032-Y10.1016/0022-5096(90)90032-Y ↗