journal article·1989-01

Microstructure and properties of extruded Al–6Mg–3Cr alloy prepared from rapidly solidified powder

E. K. Ioannidis, G. J. Marshall, T. Sheppard

Publisher page

Abstract

Experiments have been carried out to determine the relationship between processing, microstructure, and mechanical properties of an Al–6Mg–3Cr powder alloy consolidated by extrusion. Attention is focused on the microstructure of the powder and the subsequent changes that occurred during thermomechanical consolidation to a fully dense product. The powder microstructure was composed of aggregates of three equilibrium phases (Al 18 Mg 3 Cr 2 , Al 3 Mg 2 , and Al 13 Cr 2 ) which were uniformly distributed within an Al matrix. Preheating to the extrusion temperature by induction had very little effect on the microstructure. However, consolidation of the powder accompanied by significant structural changes occurred during passage through the extrusion shear zone. The extruded microstructure was found to be inhomogeneous with coarse and fine bands of precipitates throughout. The inhomogeneities of extrudate microstructure have been related to the original powder and were caused by the wide range in powder particle size. The structural heterogeneities adversely influenced the extrudate properties, in particular, fracture behaviour, which was highlighted in poor toughness and ductility in a direction transverse to the working orientation. MST/840
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties · Thermodynamic and Structural Properties of Metals and Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. JONES H.: Aluminium, 1978, 54, (4), 274–281.
2. STARKE E. A. JR: in Proc. 6th Int. Conf. on ‘Strength of metals and alloys’ Melbourne Aug. 1982 pp. 1025-1044.10.1016/B978-1-4832-8423-1.50163-2 ↗
3. MARSHALL G. J. IOANNIDIS E. K. and SHEPPARD T.: Powder Met. 1986 29 (1) 57–64.10.1179/pom.1986.29.1.57 ↗
4. TAN G. H.: PhD thesis University of London 1985.
5. GRIFFITH W. M. SANDERS R. E. and HILDEMAN G. J.: in ‘High strength PM aluminium alloys’ (ed. Koczak M. J. and Hildeman G. J.) 209; 1982 New York AIME.
6. CLYNE T. W., , RICKS R. A., , and GOODHEW P. J.: Int. J. Rapid Solidification, 1984-85, 1, 59–80.
7. RICKS R. A. and ADKINS N. J. E.: in ‘Aluminium technology ‘86’ (Conf. Proc.) (ed. Sheppard T. 689-696; 1986 London The Institute of Metals.
8. MARSHALL G. J.: unpublished research, Alcan International, Banbury, 1987.
9. MILLER W. S. HUGHES I. R. PALMER I. G. THOMAS M. P. SAINI T. S. and WHITE J.: in ‘Aluminium Powder Met’ (ed. Hildeman G. J. and Koczak M. J. N. 311-331; 1985 Warrendale PA The Metallurgical Society of AIME.
10. MONDOLFO L. F.: ‘Aluminium alloys: Structure and properties’; 1976 London Butterworths.10.1016/B978-0-408-70932-3.50008-5 ↗
11. MARSHALL G. J.: J. Mater. Sci., 1987, 22, 3581-3588.
12. 10.1179/03063458379042053810.1179/030634583790420538 ↗
13. IOANNIDIS E. K., , MARSHALL G. J., , and SHEPPARD T.: J. Mater. Sci., 1988, 23, 1486-1495.
14. MULLINS J. W.: MSc thesis Georgia Institute of Technology 1982.
15. SINGER R. F. and COUPER M. J.: ‘Advanced materials research and developments for transport and light metals’ (Conf. Proc.) (ed. R. J. H. Wanhill et al.) 139; 1985 European Materials Research Society (E-MRS).
16. 10.1179/mst.1986.2.6.61110.1179/mst.1986.2.6.611 ↗
17. 10.1179/03063458479042009610.1179/030634584790420096 ↗
18. KIM Y.-W., , GRIFFITH W. M., , and FROES F. H.: J. Met., 1985, 37, (8), 27–33.
19. PALMER I. G. and wax G. C.: in ‘Oxide dispersion strengthening’ (Conf. Proc.) (ed. Ansell G. S. et al.) 253; 1968 New York Gordon and Breach.