journal article·2004-09

Influence of steel strength and loading mode on fatigue properties of resistance spot welded H beam components

S.J. Hambling, T.B. Jones, G. Fourlaris

Materials Science and Technology· Volume 20· Issue 9
Publisher page

Abstract

The drive to downgauge steel components by substituting mild steel with thinner high strength steel means that design engineers are now working closer to the design limits with respect to fatigue performance of spot welded structures. This study was carried out on an interstitial free mild steel and two high strength interstitial free steels, in sheet thicknesses 0.8 and 1.2 mm, representative of sheet thicknesses and grades in typical body-in-white automotive structures. The results obtained indicate that steel strength had little effect on fatigue performance for the range of steels studied. In contrast, both the loading mode and the sheet thickness had a significant influence. The results for shear loading were up to ten times greater when compared to peel loading conditions. Under shear loading conditions full plug failures were widely observed, whereas with peel loaded variants partial plug failures predominated. With respect to enhancing the fatigue properties the use of larger weld sizes was shown to be beneficial.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Welsh Technology Centre, Corus UK, Port Talbot, SA13 2NG, UK

Engineering Doctorate Centre, Materials Research Centre, School of Engineering, University of Wales Swansea, Singleton Park, Swansea, SA2 8PP, UK

References (27)

Show source-provided references
1. Fatigue MSC.: ‘MSC fatigue users guide’ Version 9 Vol. 2 13 1131— 1222; 1999 Santa Ana CA MSC Software Corp.
2. ELLWOOD R. and LEWIS C.: ‘Maximising the fatigue durability of down-gauged high strength steel structures ’ Compass 99 University of Wales Swansea March—April 1999 EMAS Publishing 359–370.
3. SPERLE J. O.: Met. Constr., 1984, 16, 678–679.
4. RUPP A. STORZEL K. and GRUBISIC O. P.: VOILLPILIET aided dimensioning of spot-welded automotive structures ’ SAE paper 950711 1995.10.4271/950711 ↗
5. British Standards Institution: ‘Code of Practice for Fatigue Design and Assessment of Steel Structures ’ BS 7608 1993.
6. BHAT S. P.: Int. Conf. Detroit February —March 1984 SAE paper 840010.
7. COOU C. H. and SUN X.: 11th Annual North American Welding Research Conf. Int. Conf. Proc November 1995 13–34.
8. SCHUTZ D. and HEULER P.: ‘The Significance of Variable Amplitude Fatigue Testing ’ ASTM STP 1231 1994 pp. 201–220.10.1520/STP13950S ↗
9. BARSOM J. M KLIPPSTEIN K. H. and SHOEMAKER A. K.: ‘Fatigue behaviour of sheet steels for automotive applications ’ Committee of Sheet Steel Produces AISI Report 5G80-2 February 1980.
10. ELLWOOD R., , JONES T. B., and FOURLARIS G.: Mater. Sei. Technol, 2003, 19, 1017–1024.
11. KRAUSE A. R. DAVIS R. G. and CHERNENKOFF R. A.: Int. Proc. Conf. Int. Symp. on ‘Interstitial free steel sheet’ Ottawa ON Canada August 1991 CIM 195–204.
12. POLLARD B.: Int. Conf. Detroit February 1982 SAE paper 820284.
13. KITAGAWA H. SATOH T. and FUJIMOTO M.: Int. Conf. Detroit 1985 SAE paper 850371.
14. HOBBACHER A.: ‘Fatigue design of welded joints and com-ponents’ 1st edn 3-127; 1996 Cambridge The International Institute of Welding Abington Publishing.10.1533/9780857093189 ↗
15. MADDOX S. J.: ‘Fatigue strength of welded structures’ 2nd edn; 1991 Cambridge Abington Publishing.
16. TOSHIO I. etal.: ‘Fatigue strength of base metal and spot welded joints in HSLA steels for automotive applications’ Nissan Kokan Technical Report No. 32 1982 31–40.
17. GAO Y., , CHUCAS D., , LEWIS C., and MCGREGOR I. J.: ‘Review of CAE fatigue analysis techniques for spot-welded high strength steel automotive structures’, SAE paper offer number 01M-65, January 2001.
18. MORI N. et al.: Int. Conf. Detroit February 1986 SAE paper 860604.
19. DOWLING N. E.: Int. Conf. Detroit October 1987 SAE paper 871966.
20. HEIKE E., and ANDRE J. P.: ISS Met. Work Steel Process. Conf. Proc., 1998, 40, 61–76.
21. FEI G. and PING C.: Int. Conf. Detroit September 1986 SAE paper 861395.
22. CUTLER A. N.: ‘Modern statistical ideas in fatigue testing ’ EIS 1998 2 (1) 14–21.
23. MURAKAWA H., and ZHANG J.: Trans. JWRI, 1998, 27, (1), 75 — 82.
24. WILLIAMS N. and Jos T. B.: ‘The mechanism of weld bonding and the properties of weld bonded joints ’ Commission of the European Communities Research Agreement No. 7210—KA/ 813 Report No. EUR 13931 June 1990.
25. WILLIAMS N.: ‘Resistance spot welding of low-carbon and high strength low-alloy steels ’ Commission of the European Communities Research Agreement No. 7210— KD/803 May 1979—May 1982.
26. JONES T. B. and WILLIAMS N. T.: Int. Conf. Detroit February 1986 SAE paper 860583.
27. British Standards Institution ‘Specification for Resistance Spot Welding of Uncoated and Coated Low Carbon Steel’ BS 1140 1993.