journal article·1997-03

Influence of heat treatment parameters on stepped austempering of 0.37%Mn-Mo-Cu ductile iron

A. Nazarbol, R. Elliott

Materials Science and Technology· Volume 13· Issue 3
Publisher page

Abstract

Measurements of the average austenite carbon content, retained austenite content, unreacted austenite content, and mechanical properties are reportedfor various austempering heat treatments of an alloyed ductile iron of composition (wt-%) Fe-3.39C-2.56Si-0.37Mn-0.25Mo-0.29Cu-0.04Mg. It is shown that a stepped austempering treatment can be used to considerably increase the ductility of the alloy compared with a single heat treatment and to extend the austempering time interval over which the ASTM standard can be satisfied. Decreasing the second step austempering temperature accelerates the stage I reaction during the second step treatment but produces little change in the mechanical properties of the alloy used in the present work. Decreasing the first step austempering time to 375°C accelerates the stage I reaction in the second step treatment but slightly decreases the maximum impact energy and increases the austempering time at which it is achieved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. DORAZIL E.: ‘High strength austempered ductile iron’; 1990 London Prentice Hall.
2. VOIGT R. C.: Cast Met. 1989 2 71.10.1080/09534962.1989.11818986 ↗
3. ELLIOTT R.: in Proc. 5th Int. Conf. on ‘Physical metallurgy of cast iron’ Nancy France October 1994 LSG2M.
4. 10.1179/mst.1993.9.7.57210.1179/mst.1993.9.7.572 ↗
5. 10.1179/mst.1993.9.7.58610.1179/mst.1993.9.7.586 ↗
6. 10.1179/mst.1993.9.10.88210.1179/mst.1993.9.10.882 ↗
7. 10.1179/mst.1994.10.2.9710.1179/mst.1994.10.2.97 ↗
8. MOO D. J. ROUNS T. N. and RUNDMAN K. B.: Trans. AFS 1986 94 155.
9. 10.1179/mst.1995.11.2.11810.1179/mst.1995.11.2.118 ↗
10. BAYATI H., and ELLIOTT R.: Mater. Sci. Technol., 1995, 11, 293.
11. 10.1179/mst.1995.11.8.77610.1179/mst.1995.11.8.776 ↗
12. 10.1179/mst.1995.11.9.90810.1179/mst.1995.11.9.908 ↗
13. 10.1179/mst.1996.12.8.67910.1179/mst.1996.12.8.679 ↗
14. 10.1179/mst.1996.12.9.78010.1179/mst.1996.12.9.780 ↗
15. 10.1080/02670836.1996.1166571710.1080/02670836.1996.11665717 ↗
16. 10.1179/mst.1997.13.1.2410.1179/mst.1997.13.1.24 ↗
17. 10.1080/13640461.1997.1181967110.1080/13640461.1997.11819671 ↗
18. 10.1179/mst.1994.10.12.106810.1179/mst.1994.10.12.1068 ↗
19. BAYATI H. and ELLIOTT R.: in Proc. 5th Int. Conf. 011 ‘Physical metallurgy of cast iron’ Nancy France October 1994 LSG2M.
20. 10.1179/mst.1995.11.10.100710.1179/mst.1995.11.10.1007 ↗
21. AHMADABADI M. NILI, , OHIDE T., , and NIYAMA E.: Trans. Jpn Foundrytnen's Soc., 1992, 11, 40.
22. 10.1179/mst.1997.13.2.11710.1179/mst.1997.13.2.117 ↗
23. BAYATI H. and ELLIOTT R.: Mater. Sci. Technol. to be published.
24. BAYATI H. and ELLIOTT R.: PhD thesis University of Manchester UK 1997.