journal article·1989-05

Superplasticity in Al–33Cu eutectic alloy in as extruded condition

A. H. Chokshi, T. G. Langdon

Publisher page

Abstract

Experiments were carried out to determine the superplastic properties of the Al–33Cu eutectic alloy in an as extruded condition. It is shown that the stress–strain curves do not attain a steady state condition and, except at high strain rates greater than ~10−2 s−1, the curves show strain hardening due to concurrent grain growth. There is a sigmoidal relationship between stress and strain rate, with a maximum strain rate sensitivity of ~ 0·5 at intermediate strain rates in region 2 and a decrease in the strain rate sensitivity to ~ 0·3 at low strain rates in region 1. The maximum elongation to failure in these experiments is ~1400% at an initial strain rate of 6·7 × 10−5 s−1 and there is a decrease in the elongations to failure at both lower and higher strain rates. From detailed experimental measurements of grain growth, it is demonstrated by calculation that there is a genuine region 1 at low strain rates in this alloy in the as extruded condition.MST/911
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. PRESNYAKOV A. A. · Izv. · 1958 · 120.
2. PRESNYAKOV A. A. · Vestn. Akad. Nauk Kazakh SSR · 1958 · 14 · 76
3. PRESNYAKOV A. A. · Fiz. Met. Metal-loved., · 1959 · 8 · 114
4. PETTY E. R. · J. Inst. Met., · 1962 · 91 · 274
5. HoLT D. L. · Trans. ASM · 1966 · 59 · 755
6. 10.1179/msc.1969.3.1.4110.1179/msc.1969.3.1.41 ↗
7. 10.1007/BF0055001810.1007/BF00550018 ↗
8. SCHMIDT-WHITLEY R. D. · Z. Metallkd., · 1973 · 64 · 552
9. HORI S. · Rep. Osaka Uni · 1973 · 75
10. 10.1007/BF0266729410.1007/BF02667294 ↗
11. 10.1115/1.344325410.1115/1.3443254 ↗
12. HATAYAMA T. · J. Jpn Soc. Technol. Plast., · 1975 · 16 · 981
13. 10.2464/jilm.25.36110.2464/jilm.25.361 ↗
14. 10.1179/msc.1977.11.5.17710.1179/msc.1977.11.5.177 ↗
15. 10.1016/0036-9748(77)90012-610.1016/0036-9748(77)90012-6 ↗
16. 10.1016/0036-9748(78)90222-310.1016/0036-9748(78)90222-3 ↗
17. 10.1179/msc.1979.13.11.61910.1179/msc.1979.13.11.619 ↗
18. HATAYAMA T. · J. Jpn Inst. Met., 1981, 45, 1326.
19. 10.1179/03071698280328619710.1179/030716982803286197 ↗
20. HATAYAMA T. · J. Jpn Inst. Met., · 1982 · 46 · 20510.2320/jinstmet1952.46.2_205 ↗
21. OKABE T. · J. Jpn Inst. Met., · 1982 · 46 · 21110.2320/jinstmet1952.46.2_211 ↗
22. 10.1007/BF0070078510.1007/BF00700785 ↗
23. 10.1007/BF0266482910.1007/BF02664829 ↗
24. 10.1016/0036-9748(85)90143-710.1016/0036-9748(85)90143-7 ↗
25. 10.1016/0036-9748(86)90508-910.1016/0036-9748(86)90508-9 ↗
26. 10.2320/matertrans1960.27.57610.2320/matertrans1960.27.576 ↗
27. 10.1007/BF0264880210.1007/BF02648802 ↗
28. 10.1016/0036-9748(87)90155-410.1016/0036-9748(87)90155-4 ↗
29. H A. · Metall. Trans., · 1988 · 19 · 248710.1007/BF02645476 ↗
30. 10.1007/BF0066094610.1007/BF00660946 ↗
31. 10.1080/1478643750822161410.1080/14786437508221614 ↗
32. 10.1007/BF0055302810.1007/BF00553028 ↗
33. 10.1007/BF0055499910.1007/BF00554999 ↗
34. WOODFORD D. A. · Trans. ASM · 1969 · 62 · 291
35. 10.1080/1478643750822810510.1080/14786437508228105 ↗
36. 10.1007/BF0061147410.1007/BF00611474 ↗
37. K. A. PADMANABIIAN and G. J. DAVIES: ‘Superplasticity'; 1980, Berlin, Springer-Verlag.10.1007/978-3-642-81456-3 ↗
38. 10.1016/0036-9748(81)90334-310.1016/0036-9748(81)90334-3 ↗
39. VALE S. H. · SCT · 1979 · 1157
40. F. R. N. NABARRO: in ‘Report of a conference on strength of solids’, 75; 1948, London, The Physical Society.
41. 10.1063/1.169968110.1063/1.1699681 ↗
42. 10.1063/1.170265610.1063/1.1702656 ↗