Liquid phase bonding of aluminium and aluminium/Nicalon composite using interlayers of Cu-Ag alloy
Source abstract
Abstract
The liquid phase bonding in air of unreinforced and fibre reinforced aluminium using interlayers of Cu-Ag alloy has been investigated. Bond strengths were measured using a simple shear jig and the associated microstructures characterised by electron microscopy and electron probe microanalysis. A shear strength of 65 MN m-2 was achieved when bonding unreinforced aluminium at 510°C using a 50 μm thick alloy interlayer, and a pressure of 10 MPa for 30 min; the bonded region covered ~85% of the area of the joint. With reinforced aluminium, a bonding pressure of 20 MPa was required to achieve sufficient contact and a similar area of bond; after application of pressure for 30 min at 510°C, a shear strength of 54 MN m-2 was developed at the joint. The diffusional behaviour and interphase reactions which occurred during the process are discussed and a mechanism for bonding proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science, University of Bath
References (6)
Show source-provided references
1. I. J. POLMEAR: ‘Light alloys: metallurgy of the light metals’, 2 edn, 252-253; 1989, London, Edward Arnold.
2. D. J. FIELD: in ‘Aluminium alloys - contemporary research and applications’, Vol. 31, 523-537; 1989, London, Academic Press.10.1016/B978-0-12-341831-9.50024-3 ↗
3. M. S. HERSH and M. FEATHERBY: in Proc. 13th Conf. ‘Structures, structural dynamics and materials’, Vol. 2, 360; 1972, San Antonio, AIAA/ASME/SAE.
4. L. F. MONDOLFO: ‘Aluminium alloys: structure and properties’, 516; 1976, London-Boston, Butterworths.10.1016/B978-0-408-70932-3.50215-1 ↗
5. D. J. FIELD, G. M. SCAMENS, and E. P. BUTLER: in Proc. 2nd Int. Conf. ‘Environmental degradation of engineering materials’, 393-405; 1981, New York, Wiley.
6. A. R. CHAPMAN: PhD thesis, University of Bath, 1991.