Low cycle fatigue resistance of SA533 pressure vessel steels
Source abstract
Abstract
Low cycle fatigue (LCF) tests were conducted on SA533 steels with different levels of sulphur content at room temperature and 300 °C. The fatigue limit shows little or no dependence on sulphur content, but significantly depends on testing temperature. At 300 °C, the fatigue limit is at 0.2% strain amplitude, slightly higher than the 0.1% strain amplitude obtained at room temperature. The fatigue limit of SA533 steel subjected to LCF tests at 300 °C was improved by the combined effects of dynamic strain aging (DSA) and grain size reduction. DSA and grain size reduction increase the steel strength and, accordingly, improve the LCF limit at 300 °C. But, concurrently, the carbide/nitride precipitates in SA533 steel lead to a decrease in steel strength. Grain size reduction and precipitation compete with each other. Grain size reduction is dominant and the net effect is reflected in the increase in hardness value. Fatigue life could be predicted either by means of the strain-life equation or the SWT (Smith, Watson and Topper) parameter for specimens under low cycle fatigue conditions. The strain-life equation for SA533 steel in air is independent of the sulphur content, but significantly dependent on the testing temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. V. N. SHAH and P. E. MACDONALD: ‘Aging and life extension of major light water reactor components’, 24, 617; 1993, Amsterdam, Elsevier Science Publishers.
2. 10.1007/BF0265029310.1007/BF02650293 ↗
3. 10.1115/1.322576710.1115/1.3225767 ↗
4. LIAW P. K. · Eng. FracL Mech · 1997 · 57 · 58
5. 10.1016/0013-7944(85)90149-310.1016/0013-7944(85)90149-3 ↗
6. 10.1016/S1359-6462(99)00358-910.1016/S1359-6462(99)00358-9 ↗
7. 10.1016/0022-3115(95)00092-510.1016/0022-3115(95)00092-5 ↗
8. 10.1016/0001-6160(65)90002-710.1016/0001-6160(65)90002-7 ↗
9. J. D. ATKINSON, Z. J. ZHAO and J. YU: in ‘Effects of the environment on the initiation of crack growth’, (ed. W. A. Van. Der Sluys et al), STP 1298, 199 —215; 1997, Philadelphia, PA, ASTM.10.1520/STP19962S ↗
10. H. ABDEL-RAOUF, A. PLUMTREE and T. H. TOPPER in ‘Cyclic stress —strain behaviour — analysis, experimentation and failure prediction’, STP 519, 28-57; 1973, Philadelphia, PA, ASTM.
11. M. KLESNIL and P. LUKkg: ‘Fatigue of metallic materials’, 30; 1980, Amsterdam, Elsevier Scientific.
12. M. KLESNIL and P. LUKkg: ‘Fatigue of metallic materials’, 57; 1980, Amsterdam, Elsevier Scientific.
13. W. A. VAN DER SLUYS and W. H. CULLEN. ‘Performance and evaluation of light water reactor pressure vessels’, (ed. R. Rungta et al), PVP— 119, 63–71; 1987, Philadelphia, PA, ASTM.
14. 10.5006/1.328483810.5006/1.3284838 ↗
15. W. C. LESLIE: ‘The physical metallurgy of steels’, 180; 1981, New York, Hemisphere.
16. T. J. BAKER: in ‘Sulphide inclusions in steel’, (ed. J. J. deBarbadillo and E. Snape), 135; 1977, Warrendale, PA, ASM.
17. W. OLDFIELD ET AL. ‘Nuclear plant irradiated steel handbook’, EPRI—NP — 4797, Electric Power Research Institute, September 1986.
18. M. KLESNIL and P. LUKkg: ‘Fatigue of metallic materials’, 18; 1980, Amsterdam, Elsevier Scientific.
19. RAO K. B. S. · Mettall Mater. Trans. A · 1997 · 28 · 347 — 361
20. 10.1007/BF0264668410.1007/BF02646684 ↗
21. KANG S. S. · Technol · 1992 · 97 · 336
22. 10.1023/A:102181721651910.1023/A:1021817216519 ↗
23. 10.1007/BF0264859510.1007/BF02648595 ↗
24. 10.1007/BF0266156610.1007/BF02661566 ↗
25. 10.1016/1359-6462(95)00685-010.1016/1359-6462(95)00685-0 ↗
26. 10.1007/BF0264688110.1007/BF02646881 ↗
27. 10.1016/0025-5416(77)90166-510.1016/0025-5416(77)90166-5 ↗
28. 10.1007/BF0264717910.1007/BF02647179 ↗
29. M. KLESNIL and P. LUKÁS: ‘Fatigue of metallic materials’, 30; 1980, Amsterdam, Elsevier Scientific.
30. N. E. DOWLING: ‘Mechanical behavior of materials’, 623–629; 1993, Englewood Cliffs, NJ, Prentice-Hall/Simon & Schuster.
31. S. SURESH: ‘Fatigue of materials’, 126–140; 1991, Cambridge, Cambridge University Press.
32. SMITH K. N. · JMLSA · 1970 · 5 · 767
33. 10.1016/0142-1123(96)82762-910.1016/0142-1123(96)82762-9 ↗