High strain rate mechanical properties of austenitic manganese steel
Source abstract
Abstract
This study uses the split Hopkinson pressure bar to investigate the high strain rate deformation and fracture behaviour of austenitic manganese steel at strain rates ranging from 2·0 × 103 to 8·0 × 103 s−1 at room temperature. Optical and scanning electron microscopy techniques are employed to analyse the fracture and microstructure characteristics of the deformed specimens in order to establish the relationships between the mechanical and microstructural properties of the tested steel. The experimental results indicate that strain rate exerts a significant influence on the flow stress of austenitic manganese steel. With increasing strain rate, the compression flow stress, work hardening rate and strain rate sensitivity increase, while the activation volume decreases. The variations of strain rate sensitivity and activation volume are closely related to the work hardening stress. It is shown that the observed flow behaviour is accurately described by the Zerilli–Armstrong constitutive equation. Fractographic analysis reveals that specimen fracture is dominated by the formation of adiabatic shear bands. Furthermore, dimple characteristics and cleavage facets are observed on the fracture surface, indicating a relatively ductile fracture mode. It is found that cleavage fracture is associated with increasing strain rate, which gives rise to a loss of deformability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Laser-Plasma Interactions and Diagnostics · Electromagnetic Launch and Propulsion Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Nemat-Nasser S., and Li Y.: Acta Mater. 1998, 46, 565–577.10.1016/S1359-6454(97)00230-9 ↗
2. 10.1179/02670839910150550910.1179/026708399101505509 ↗
3. 10.1016/S1359-6462(99)00308-510.1016/S1359-6462(99)00308-5 ↗
4. Regazzoni G., Kocks U. F., and Follansbee P. S.: Acta Metall. 1987, 35, 2865–2875.10.1016/0001-6160(87)90285-9 ↗
5. Follansbee P. S., and Gray G. T. III:Mater. Sci. Eng. A, 1991, A138,23–31.10.1016/0921-5093(91)90673-B ↗
6. Cerri E., Evangelista E., Forcellese A., and McQueen H. J.: Mater. Set Eng. A, 1995, A197,181–198.10.1016/0921-5093(94)09714-3 ↗
7. 10.1016/0025-5416(73)90066-910.1016/0025-5416(73)90066-9 ↗
8. Follansbee P. S., and Kocks U. F.: Acta Metall. 1988, 36, 81–93.10.1016/0001-6160(88)90030-2 ↗
9. 10.1115/1.316720710.1115/1.3167207 ↗
10. Lee W. S., and Lin C. F.: Mater. Set Eng. A, 1998, A241,48–59.
11. 10.1007/s11661-998-0175-110.1007/s11661-998-0175-1 ↗
12. 10.1016/0734-743X(89)90027-410.1016/0734-743X(89)90027-4 ↗
13. 10.1016/0022-5096(87)90035-410.1016/0022-5096(87)90035-4 ↗
14. 10.1007/BF0264731110.1007/BF02647311 ↗
15. 10.1016/0022-5096(84)90014-010.1016/0022-5096(84)90014-0 ↗
16. 10.1007/BF0238573510.1007/BF02385735 ↗
17. 10.1007/BF0264833910.1007/BF02648339 ↗
18. Owen W. S., and Grujicic M.: Acta Mater. 1999, 47, 111–126.10.1016/S1359-6454(98)00347-4 ↗
19. 10.1179/cmq.2000.39.3.36110.1179/cmq.2000.39.3.361 ↗
20. 10.1016/0924-0136(94)90082-510.1016/0924-0136(94)90082-5 ↗
21. Goldberg A., Ruano O. A., and Sherby O. D.: Mater. Set Eng. A, 1992, A150,187–194.10.1016/0921-5093(92)90111-D ↗
22. Lee W. S., Xiea G. L., and Lin C. F.: Mater. Set Eng. A, 1998, A257,256–267.10.1016/S0921-5093(98)00852-1 ↗
23. 10.1016/0025-5416(79)90172-110.1016/0025-5416(79)90172-1 ↗
24. 10.1016/0020-7403(80)90066-110.1016/0020-7403(80)90066-1 ↗
25. Mecking H., and Kocks U. F.: Acta Metall. 1981, 29, 1865–1875.10.1016/0001-6160(81)90112-7 ↗
26. Zerilli F. J., and Armstrong R. W.: Acta Metall. 1992, 40, 1803–1808.10.1016/0956-7151(92)90166-C ↗
27. Conrad H. · J. Met · 1964 · 16 · 582
28. Johnson G. R., and Cook W. H.: Proc. 7th Int. Symp. on ‘Ballistics’, The Hague, The Netherlands, April 1983, International Ballistics Committee, 541.
29. 10.1016/0022-5096(86)90004-910.1016/0022-5096(86)90004-9 ↗
30. 10.1016/0022-5096(94)90026-410.1016/0022-5096(94)90026-4 ↗
31. Zerilli F. J., and Armstrong R. W.: in ‘High strain rate effects on polymer, metal and ceramic matrix composites and other advanced materials’, (ed. Y. D. S. Rajapakse and J. R. Vinson), AD-Vol. 48, 121-126; 1995, New York, ASME.
32. 10.1063/1.33802410.1063/1.338024 ↗