journal article·1996-05

Compaction and in plane permeability characteristics of quasi unidirectional and continuous random reinforcements

C. D. Rudd, L. J. Bulmer, D. J. Morris, K. N. Kendall

Materials Science and Technology· Volume 12· Issue 5
Publisher page

Abstract

Compaction and permeability behaviour are important influences on the processing of composites for a range of manufacturing techniques including liquid composite moulding (LCM) and compression moulding. This paper describes an experimental study of the factors influencing these characteristics for two glass fibre reinforcement media used in LCM: continuous strand mat and an aligned fabric produced using warp knitting technology. The compaction relationships for the materials are presented as functions of process variables such as pressure, temperature, and forming rate. In plane permeability relationships measured using rectilinear and radial flow tests are presented for different fibre orientations and packing fractions. The results are discussed with reference to processing by resin transfer and structural reaction injection moulding.MST/3248
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Composite Material Mechanics · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 10.1243/PIME_PROC_1992_206_060_0210.1243/PIME_PROC_1992_206_060_02 ↗
2. RUDD C. D. · Plast. Rubber Compos. Process. Appl · 1993 · 20 · 67
3. 10.1007/978-94-011-2874-2_910.1007/978-94-011-2874-2_9 ↗
4. AGGLETON M. J.
5. RAMAURTHY H. · High Temp—High Press. · 1989 · 21 · 167
6. L. J. BULMER: PhD thesis, University of Nottingham, 1994.
7. R. C. PETERSON and R. E. ROBERTSON: in Proc. Conf. on ‘Advanced composite materials: new developments and applications’, Detroit, MI, USA, September-October 1991, ASM/ESD, 203–208.
8. B. N. GREVE and S. K. SOH: in Proc. SAE Int. Congress Exposition on ‘Polymer composites for structural automotive applications’, November 1990, Society of Automotive Engineers, 101–113.
9. 10.1002/pen.76014060310.1002/pen.760140603 ↗
10. P. R. GRIFFIN, S. M. GROVE, F. J. GUILD, P. RUSSELL, D. SHORT, and E. TAYLOR: in Proc. Conf. on ‘Flow processes in composite materials’, Galway, Ireland, July 1994, University College Galway, 337–353.
11. 10.1002/pen.76032040210.1002/pen.760320402 ↗
12. 10.1002/pc.75010060510.1002/pc.750100605 ↗
13. R. GAUVIN and M. CHIBANI: in Proc. 45th Annual Composites Institute Conf., February 1990, Society of the Plastics Industry, Session 9F.
14. T. WANG, C. H. WU, N. PATEL, and L. J. LEE: in Proc. 8th Annual Advanced Composites Conf., Chicago, IL, USA, November 1992, ASM/ESD, 47–55.
15. A. J. SALEM and R. S. PARNAS: in Proc. 6th Technical Conf. on ‘Composite materials’, Albany, NY, USA, October 1991, American Society for Composites, 1012–1021.
16. 10.1016/0301-9322(88)90006-710.1016/0301-9322(88)90006-7 ↗
17. HIRT D. E. · J. Therm. Insul. · 1987 · 10 · 15310.1177/109719638701000303 ↗
18. 10.1002/pen.76031161310.1002/pen.760311613 ↗
19. K. L. ADAMS: PhD thesis, Princeton University, NJ, USA, 1989.
20. MILLER D. · Textile Res. J. · 1975 · 5 · 150
21. Y. R. KIM, S. P. McCARTHY, J. P. FANUCCI, S. C. NOLET, and C. KOPPERNAES: in Proc. 22nd Int. SAMPE Technical Conf., Boston, MA, USA, November 1990, SAMPE, 709–723.
22. 10.1002/pc.75012010410.1002/pc.750120104 ↗
23. A. G. GIBSON: in Proc. Conf. ‘Thermosets '91’, Solihull, UK, April 1991, The Plastics and Rubber Institute, 9.1–9.17.
24. K. A. LINDSEY: PhD thesis, University of Nottingham, 1994.
25. 10.1177/00219983870210020710.1177/002199838702100207 ↗
26. 10.1177/00219983920260080810.1177/002199839202600808 ↗
27. 10.1002/pc.75012010510.1002/pc.750120105 ↗
28. R. GAUVIN and M. CHIBANI: in Proc. 43rd Annual Composites Institute Conf., Cincinnati, OH, USA, February 1988, Society of Plastics Industry, Session 22-C, 1–4.
29. C. D. RUDD, A HARRISON, E. V. RICE, K. N. KENDALL, L. J. BULMER, A. C. LONGBOTTOM, and M. J. OWEN: in Proc. 8th Annual Advanced Composites Conf., Chicago, IL, USA, November 1992, ASM/ESD, 215–230.
30. KIM Y. R. · SAMPE Q. · 1991 · 22 · 16
31. R. GAUVIN, F. TROCHU, Y. LEMENN, and M. L. DIALLO: in Proc. Workshop on ‘Manufacturing polymer composites by liquid molding’, Gaithersburg, MD, USA, September 1993, National Institute of Standards and Technology, 131–147.