Modelling extrusion of 2618 aluminium alloy and 2618-1 10%AI203and 2618-20%AI203composites
Source abstract
Abstract
The metal matrix composites 2618-10%Al2O3 and 2618-20%Al2O3 have been subjected to hot torsion testsfor temperatures T from 300 to 500°C and strain rates ε from 0.1 to 5 S-l. The flow stresses decrease with increasing temperature and decreasing strain rate and the composites have greater strength than the matrix alloy. The strength of the extruded 2618-10%Al2O3 is higher than that of the as cast 2618-20%Al2O3. A constitutive analysis has been carried out with the sinh Arrhenius equation for the composites and the alloy. Plots of log ε versus log(sinh a(ασp) and log(sinh αςp) versus 1/T are approximately linear over the range of conditions tested. To improve the deformation processing, which is requiredfor many discontinuously reinforced metal matrix composites, the extrusion of the three materials has been modelled using the finite element software Deform and the constitutive laws determined above. Of particular significance are the dependences of peak load and maximum temperature on billet temperature and ram speed for an extrusion ratio of 31.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. H. J. McQUEEN and P. SAICARIS: in ‘Composite structures and materials’, (ed. S. V. Hoa and R. Gauvin), 297–306; 1992, London, Elsevier.
2. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
3. 10.1007/BF0322263410.1007/BF03222634 ↗
4. CHEN W. C. · 1994 · University of B
5. QIN Q. · 1994 · Concordia Unive
6. McQUEEN H. J. · Mater. Forum · 1993 · 17 · 1
7. 10.1179/cmq.1996.35.4.30510.1179/cmq.1996.35.4.305 ↗
8. McQUEEN H. J. · Can. Metall. Q · 1997 · 36 · 73
9. 10.1016/0924-0136(92)90304-B10.1016/0924-0136(92)90304-B ↗
10. H. J. McQUEEN, J. CHARLTON, and E. HERBA: in ‘Light metals 98’, (ed. M. Gilbert and M. Sahoo), 1998, Montreal, Metal Society of Canadian Institute of Mining and Metallurgy.
11. 10.1179/mst.1998.14.9-10.105710.1179/mst.1998.14.9-10.1057 ↗
12. SAUERBORN M. · 1997 · Montreal
13. 10.1515/SECM.1996.5.3-4.21510.1515/SECM.1996.5.3-4.215 ↗
14. 10.1520/JTE10554J10.1520/JTE10554J ↗
15. 10.1179/mst.1998.14.9-10.93910.1179/mst.1998.14.9-10.939 ↗
16. XIA X. · Microstruct. Sci · 1995 · 22 · 297
17. 10.1179/mst.1994.10.6.48710.1179/mst.1994.10.6.487 ↗
18. 10.1016/0956-716X(95)00123-D10.1016/0956-716X(95)00123-D ↗
19. 10.1007/BF0282571110.1007/BF02825711 ↗
20. 10.1007/BF0013505510.1007/BF00135055 ↗
21. SAKARIS P. · 1989 · Concordia Unive
22. AKERET R. · J. Inst. Met · 1967 · 95 · 204
23. VALBERG H. · Int. J. Mater. Prod. Technol · 1994 · 9 · 42810.1504/IJMPT.1994.036432 ↗