journal article·1993-10

Influence of heat treatment and hot working on fracture toughness of cast aluminium base composites

L. Wei, J. C. Huang

Materials Science and Technology· Volume 9· Issue 10
Publisher page

Abstract

Evaluation of toughness in terms of the fracture energy E*, obtained using Charpy impact testing and the fracture toughness K Ic obtained from bend tested specimens, has been carried out for various cast particle reinforced aluminium base composites, namely, A356–SiC, A357–SiC, 6061–Al 2 O 3 , and 2014–Al 2 O 3 . In practice, the first two are used in the as cast foundry condition and the last two in the cast and extruded condition. Hot extrusion or rolling to reduction ratios between 2 : 1 and 50: 1 was conducted on the 6061 and 2014 composites to characterise the influence of working processes. Heat treatment conditions considered included the as cast (or as worked), solid solution treated, and T6 temper. The results show that extrusion or rolling can markedly improve the toughness, but on thermal aging the toughness is reduced. The increase in total fracture energy by hot working is mainly caused by the increase of initiation energy, whereas the decrease of fracture energy by artificial aging is controlled by the propagation energy. The values of K Ic obtained for these composites are from 15 to 25 MN m −3/2 . Comparisons and interpretations of the dynamic Charpy fracture energy, quasistatic fracture toughness, and fracture surface of the four composites are also presented. MST/1806
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. 10.1016/S0036-9748(88)80152-210.1016/S0036-9748(88)80152-2 ↗
2. 10.1179/02670839279016988510.1179/026708392790169885 ↗
3. KAMAT S. V. HIRTH J. H. and MEHRABIAN R.: Acta Metall. 1989 37 2395-2402.10.1016/0001-6160(89)90037-0 ↗
4. 10.1016/0956-716X(91)90237-U10.1016/0956-716X(91)90237-U ↗
5. 10.1016/0921-5093(89)90392-410.1016/0921-5093(89)90392-4 ↗
6. 10.1179/mst.1989.5.1.110.1179/mst.1989.5.1.1 ↗
7. BARSOM J. M. and ROLFE S. T.: ‘Impact testing of metals’ STP 466 281-288; 1970 Philadelphia PA ASTM.10.1520/STP32067S ↗
8. ROBERTS R. and NEWTON C.: Bulletin 265 Welding Research Council Cambridge February 1981.
9. 10.1179/02670839279016989410.1179/026708392790169894 ↗
10. 10.1007/BF0335095310.1007/BF03350953 ↗
11. 10.1007/BF0266737110.1007/BF02667371 ↗
12. ‘Aluminum — properties and physical metallurgy’ (ed. Hatch J. E. ); 1984 Metals Park OH ASM.
13. KLIMOWICZ T. E and VECCHIO R. S.: in ‘Fundamental relation-ships between microstructures and mechanical properties of metal—matrix composites’ (ed. Liaw P. K. and Gungor M. N. ) 255-267; 1990 Warrendale PA TMS.
14. 10.1016/0036-9748(87)90431-510.1016/0036-9748(87)90431-5 ↗
15. MANOHARAN M., and LEWANDOWSKI J. J.: Scr. Metall., 1989, 23, 301–304.
16. MANOHARAN M. and LEWANDOWSKI J. J.: Acta Metall. 1990 38 489–496.10.1016/0956-7151(90)90155-A ↗
17. ADAMS D. F.: in Proc. 4th Conf. on ‘Composite materials: testing and design’ 409-426; 1977 STP 617 Philadelphia PA ASTM.10.1520/STP26957S ↗
18. NAKAGAWA A. H. and GUNGOR M. N.: in ‘Fundamental relationships between microstructures and mechanical prop-erties of metal—matrix composites’ (ed. Liaw P. K. and Gungor M. N. ) 127-143; 1990 Warrendale PA TMS.
19. 10.1016/0956-716X(91)90498-P10.1016/0956-716X(91)90498-P ↗
20. 10.1016/0921-5093(91)90567-710.1016/0921-5093(91)90567-7 ↗
21. FLOM Y. and ARSENAULT R. J.: Acta Metall. 1989 37 2413–2423.10.1016/0001-6160(89)90039-4 ↗
22. HERTZBERG R. W.: ‘Deformation and fracture mechanisms of engineering materials’ 3 edn 341; 1988 New York Wiley.
23. 10.1016/0921-5093(91)90568-810.1016/0921-5093(91)90568-8 ↗
24. HassoN D. F. and CROWE C. R.: in Proc. Conf. ‘Strength of metals and alloys’ 1515-1520; 1985 Oxford Pergamon.
25. HERTZBERG R. W.: ‘Deformation and fracture mechanisms of engineering materials’ 3 edn 304; 1989 New York Wiley.