journal article·2000-11

Achieving superplasticity at high strain rates using equal channel angular pressing

M. Furukawa, Z. Horita, M. Nemoto, T.G. Langdon

Materials Science and Technology· Volume 16· Issue 11-12
Publisher page

Abstract

Equal channel angular pressing (ECAP) is a processing procedure in which a sample is pressed through a die containing a channel bent into an L shaped configuration. This procedure introduces a high strain into the sample without any change in the cross-sectional area and it may be used to attain an ultrafine grain size with dimensions lying typically within the submicrometer range. This paper describes a series of experiments where ECAP was applied to a commercial Al–Mg–Li–Zr alloy having an initial grain size of ∼400 µm. The results demonstrate a refinement in the grain size of this alloy to a size of ∼1 µm and it is shown that these small grains are stable up to temperatures >600 K because of the presence of β′-Al3Zr particles. The stability of these ultrafine grains at elevated temperatures provides an opportunity to achieve superplastic ductilities in this alloy at very high strain rates: for example, the measured elongations to failure under optimum pressing conditions exceed 1000% at a strain rate of 10-1 s-1 when testing at temperatures above 600 K.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. 10.1098/rsta.1999.039510.1098/rsta.1999.0395 ↗
2. RICHERT J. · Aluminium · 1986 · 62 · 604
3. 10.1016/S0965-9773(99)00384-010.1016/S0965-9773(99)00384-0 ↗
4. SEGAL V. M. · Russ. Metall · 1981 · 1 · 99
5. 10.1557/JMR.1999.056910.1557/JMR.1999.0569 ↗
6. 10.1016/1359-6462(96)00107-810.1016/1359-6462(96)00107-8 ↗
7. 10.1007/s11661-998-0027-z10.1007/s11661-998-0027-z ↗
8. 10.1007/s11661-998-0101-610.1007/s11661-998-0101-6 ↗
9. 10.1080/09500839817789610.1080/095008398177896 ↗
10. P. B. BERBON, N. K. TSENEV, R. Z. VALIEV, M. FURUKAWA, Z. HORITA, M. NEMOTO, and T. G. LANGDON: in ‘Advanced light alloys and composites’, (ed. R. Ciach), 477–486; 1998, Dordrecht, Kluwer.10.1007/978-94-015-9068-6_63 ↗
11. COSTAS L. P. · Trans. AIME · 1962 · 224 · 970