journal article·1993-06

Development of corrosion resistant magnesium alloys Part 1 Characterisation of splat quenched Mg–10Al and Mg–16Al alloys

C. B. Baliga, P. Tsakiropoulos

Publisher page

Abstract

The surfaces and bulk of splat quenched Mg–10Al and Mg–16Al (wt-%) alloys were investigated. The surfaces were studied using X-ray photoelectron spectroscopy (XPS) , X-ray excited Auger electron spectroscopy (X-AES), Rutherford backscattering spectrometry (RBS) , scanning electron microscopy (SEM), and electron probe microanalysis (EPMA) and the bulk using X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The solid solubility of Al in Mg was extended to at least 16 wt-%. The quantity of Al ions present on the surfaces of the alloys increased with Al content. Contrary to the suggested layered MgO/Mg–Al–oxide/alloy structure, the surfaces of the alloys consisted of an admixture of magnesium spinel (MgAl2O4) in periclase (MgO) and brucite (Mg(OH)2) of non-uniform thickness varying between 10 and 50 nm, determined via RBS, X-AES, and depth profiling using XPS.MST/1714a
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. 10.1016/0025-5416(88)90386-210.1016/0025-5416(88)90386-2 ↗
2. BALIGA C. B. · J. Mater. Sc · 1497 · 1991, 26
3. C. B. BALIGA: PhD thesis, University of Surrey, 1990.
4. BALIGA C. B. · Int. J. Rapid Solidif., · 1989 · 4 · 231
5. 10.1016/0168-583X(88)90048-110.1016/0168-583X(88)90048-1 ↗
6. JCPDS Powder Diffraction File: Inorganic; 1986, Swarthmore, PA, International Centre for Diffraction Data.
7. 10.1016/0368-2048(73)80022-210.1016/0368-2048(73)80022-2 ↗
8. HEHMANN F. · J. Mater. Scl. · 1990 · 90 · 2369