journal article·1991-06

Influence of predeformation on microstructure and mechanical properties of 1020 dual phase steel

Jingke Liu, Zhonghao Jiang, Jianshe Lian

Publisher page

Abstract

The effects of predeformation on the microstructure and mechanical properties of 1020 dual phase steel were investigated. It was found that predeformation showed a significant refinement effect on the microstructures of both ferrite and martensite. The amount of twin martensite was found to increase with increasing predeformation. Ferrite twins were found to form close to martensite/ferrite boundaries. The reasons for the formation oftheferrite twin and the increase of the martensite twin due to predeformation were analysed. Results of tensile tests have shown that both yield strength and tensile strength increase with increasing predeformation, and predeformation was also shown to have a complex influence on the uniform elongation and total elongation of this dual phase steel.MST/1181
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. SPECICH G. R. · Metall. Trans., · 1982 · 13 · 1419
2. R. D. LAWSON, D. K. MATLOCK, and G. KRAUSS: in ‘Fundamentals of dual phase steel’, (ed. R. A. Kot and B. L. Bramfitt), 347; 1981, Warrendale, PA, TMS-AIME.
3. P. WYCLIFFE, G. R. PURDY, and J. D. EMBURY: in ‘Fundamentals of dual phase steel’, (ed. R. A. Kot and B. L. Bramfitt), 59; 1981, Warrendale, PA, TMS-AIME.
4. C. I. GARCIA and A. J. DeARDO: in ‘Structure and properties of dual phase steel’, (ed. R. A. Kot and J. W. Morris), 40; 1979, Warrendale, PA, TMS-AIME.
5. 10.1007/BF0264855110.1007/BF02648551 ↗
6. PUSSEGODA N. · Metall. Trans., · 1984 · 15 · 149910.1007/BF02648582 ↗
7. 10.1007/BF0281422810.1007/BF02814228 ↗
8. YANG D. Z. · Metall. Trans., · 1985 · 16 · 138510.1007/BF02658671 ↗
9. YANG D. Z. · Metall. Trans., · 1985 · 16 · 152310.1007/BF02658685 ↗
10. CHANG P. H. · Metall. Trans., · 1984 · 15 · 67110.1007/BF02644198 ↗
11. D. Z. YANG, D. K. MATLOCK, and G. ICRAUSS: in ‘Strength of metals and alloys’, (ed. H. J. McQueen et al.), 183; 1985, London, The Institute of Metals.10.1016/B978-0-08-031642-0.50038-6 ↗
12. LESLIE W. C. · Trans. ASM., · 1964 · 37 · 972
13. IISU T. Y. · Acta Metall., · 1984 · 32 · 34310.1016/0001-6160(84)90107-X ↗
14. SHEN X. P. · Acta Metall. Sin., · 1989 · 105 · 25
15. 10.1016/0001-6160(63)90157-310.1016/0001-6160(63)90157-3 ↗
16. T. GLADMAN and F. B. PICKERING: in ‘Yield, flow, and fracture of polyerystals’, (ed. T. N. Baker), 141; 1983, London, The Institute of Metals.
17. MORRISON W. B. · Trans. ASM · 1966 · 59 · 824
18. MOYER J. M. · Metall. Trans., · 1975 · 6 · 17810.1007/BF02642308 ↗
19. 10.1007/BF0265992410.1007/BF02659924 ↗
20. CHANG P. H. · Acta Metall., · 1985 · 33 · 89710.1016/0001-6160(85)90114-2 ↗
21. BALLINGER N. K. · Met. Sci., · 1981 · 15 · 9510.1179/030634581790426615 ↗
22. 10.1179/03063458279042743310.1179/030634582790427433 ↗
23. 10.1080/1478643660822428210.1080/14786436608224282 ↗
24. MARDER A. R. · Metall. Trans., · 1982 · 13 · 8510.1007/BF02642418 ↗