Metallurgical aspects in welding Cr–Mo–V turbine rotor steels Part 1 Evaluation of base material and heat affected zone
Source abstract
Abstract
A metallurgical evaluation of the weldability of a high pressure/intermediate pressure turbine rotor has been undertaken to determine whether AS1M A470 (class 8) rotors can be weld repaired. The work was carried out using a retired rotor that had been in service for over 20 years. The rotor base material was found to have experienced embrittlement during service. It was determined that no heat treatment was necessary before welding, as long as a post-weld heat treatment at 677°C was performed. The coarse grained bainitic structure and embrittled condition of the rotor material were metallurgical factors for possible reheat cracking of the heat affected zone (HAZ) in this type of rotor. However, the grain refinement experienced by the HAZ and the coarsening of carbides in the coarse grain HAZ improved the toughness greatly and eliminated or reduced the susceptibility of reheat cracking. The weldment produced shows good room temperature mechanical properties; however, the stress rupture properties of the HAZ could not be evaluated owing to the premature failure of the weld metal.MST/822
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. BURGESS N. T. · Weld. Met. Fabr., · 1962 · 30 · 105
2. BENTLEY K. P. · Br. Weld. J., · 1964 · 11 · 507
3. ZENZIN V. N. · Avtom Svarka · 1968 · 21 · 1
4. 10.1016/0039-6028(75)90124-710.1016/0039-6028(75)90124-7 ↗
5. SWIFT R. A. · Weld. J., · 1973 · 52 · 145s
6. SWIFT R. A. · April 1974
7. SHRON R. Z. · Svarka · 1973 · 26 · 5
8. BAKER R. G. · J. Iron Steel Inst., · 1959 · 192 · 257
9. 10.1016/0022-3115(82)90752-810.1016/0022-3115(82)90752-8 ↗
10. BONISZEWSKI T. · Weld. J., · 1972 · 51 · 29
11. 10.1179/03071698080328701710.1179/030716980803287017 ↗
12. LIEN G. E. · Trans. AIME · 1954 · 76 · 1075
13. EMERSON R. W. · Weld. J., · 1962 · 41 · 385s
14. KLUEH R. L. · Weld J., · 1982 · 61 · 302s
15. WOODFINE B. C. · J. Iron Steel Inst., · 1953 · 173 · 240
16. CAPUS J. M. · J. Iron Steel Inst., · 1962 · 200 · 922
17. GOOCH D. J. · Weld. J., 1980, 69, 10s-18s
18. KLUEH R. L. · Weld. J., · 1983 · 62 · 154s
19. CAHOON J. B. · Metall. Trans., · 1971 · 2 · 197910.1007/BF02913433 ↗
20. FERREL D. E. · Report, Pressure Vessel Research Council, New York, May 1973