Microstructural developments in type 316L stainless steel during low-cycle fatigue at 350–550°C and their effects on cyclic strength and life
Source abstract
Abstract
The low-cycle-fatigue behaviour and the related dislocation substructures of type 316L stainless steel in both the solution annealed and aged states have been investigated. Fully reversed, strain controlled continuous fatigue tests were performed on the material over strain ranges of ±0·25, ±0·3125, ±0·375, and ± 0·5% at a constant strain rate of 10−3 s−1 and at temperatures of 350, 450, and 550°C. It is shown that cyclic strengthening increases with temperature and short-term aging. This is attributed to the interaction between dislocations and carbide precipitates, which grow during fatigue as well as during aging. A model which predicts fatigue-associated growth is developed and shows reasonable agreement with experimental results. The results also demonstrate that the dislocation structures observed in the annealed specimens at all three temperatures are characterized by cells. Aging produces smaller and better-defined cells at 350°C, but causes thick and dense dislocation walls (as opposed to cells) to form at 450 and 550°C. In both conditions a reduction of fatigue life occurs as temperature increases. Although aging has a detrimental effect on life at 450 and 550°C, it has a beneficial effect at 350°C.MST/395
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. CIIARNOCK W. · Energy · 1978 · 17 · 119
2. MARSHALL P. · Energy · 1981 · 20 · 257
3. 10.1016/0022-3115(82)90706-110.1016/0022-3115(82)90706-1 ↗
4. D. R. HARRIES: ‘Review of progress on fusion materials technology, irradiation effects in fusion reactor materials’, Report AERE-M3170, AERE Harwell, Dec. 1980.
5. 10.1016/0022-3115(83)90139-310.1016/0022-3115(83)90139-3 ↗
6. 10.1016/0022-3115(83)90135-610.1016/0022-3115(83)90135-6 ↗
7. 10.1007/BF0264306710.1007/BF02643067 ↗
8. 10.1016/0001-6160(67)90138-110.1016/0001-6160(67)90138-1 ↗
9. 10.1111/j.1460-2695.1981.tb01134.x10.1111/j.1460-2695.1981.tb01134.x ↗
10. R. A. CAROLAN and R. G. FAULKNER: in ‘Mechanical behaviour and nuclear applications of stainless steel at elevated temperatures’. 22; 1982, London, The Metals Society.
11. 10.1007/BF0267231510.1007/BF02672315 ↗
12. 10.1179/mst.1985.1.6.44210.1179/mst.1985.1.6.442 ↗
13. P. I. WILLIAMS: PhD thesis, Loughborough University of Technology, 1985.
14. H. MUGHRABI: in ‘Metallurgy and materials science: deforma-tion of multi-phase and particle-containing materials’, 65; 1983, Roskilde, Riso National Laboratory.
15. F. J. IIUMPHREYS: ‘Dislocations and properties of real materials’, 175; 1985, London, The Institute of Metals.
16. 10.1080/1478643700823842610.1080/14786437008238426 ↗
17. 10.1007/BF0264765910.1007/BF02647659 ↗
18. 10.1007/BF0068843210.1007/BF00688432 ↗
19. BRINKMAN C. R. · Nucl. Technol., · 1977 · 33 · 7610.13182/NT77-A31765 ↗
20. 10.1007/BF0266052410.1007/BF02660524 ↗
21. 10.1016/0013-7944(73)90056-810.1016/0013-7944(73)90056-8 ↗
22. 10.1016/0025-5416(79)90091-010.1016/0025-5416(79)90091-0 ↗