journal article·2000-02

Superplastic behaviour of as received superplastic forming grade IN718 superalloy

B.P. Kashyap, M.C. Chaturvedi

Materials Science and Technology· Volume 16· Issue 2
Publisher page

Abstract

Tensile specimens of superplastic forming grade IN718 superalloy, containing banded microstructure in the as received state, were deformed at high temperatures T to investigate the stress σ versus strain rate ɛ · behaviour, the nature of the stress versus strain ɛ curves, ductility, and microstructure upon failure. The log σ–log ɛ · plot for the ɛ · range ∼5 × 10-6–3 × 10-2 s-1 at T = 1173–1248 K exhibited a strain rate sensitivity index m = 0·62 at low strain rates and m = 0·26 at high strain rates, representing region II and III behaviour, respectively. The activation energies were estimated to be 308 and 353 kJ mol-1, respectively. All the σ–ɛ curves, obtained at ɛ · = 1 × 10-4 s-1 for the temperature range 1173–1273 K, and at T = 1198 K for the strain rate range 1 × 10-4–1 × 10-2 s-1, exhibited initial flow hardening, followed by flow softening. The microstructures revealed dynamic recrystallisation, grain growth, cavitation, and a variation in the amount of second phase particles. Grain growth and cavitation were found to increase with temperature in region II. Excessive grain growth at 1273 K led to the elimination of region II. Grain growth and cavitation were both found to be less pronounced as the strain rate increased in region III.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. 10.1016/0079-6425(76)90005-010.1016/0079-6425(76)90005-0 ↗
2. 10.1051/rphysap:019780013020530010.1051/rphysap:0197800130205300 ↗
3. 10.2514/3.860810.2514/3.8608 ↗
4. SMITH G. D. · Adv. Mater. Process · 1994 · 145 · 32
5. G. D. W. SMITH, S. R. GREGORY, Y. MA, Y. LI, and T. G. LANGDON: in `Superalloys 718, 625, 706 and various derivatives', (ed. E. A. Loria), 303–314; 1997, Warrendale, PA, TMS.10.7449/1997/Superalloys_1997_303_314 ↗
6. GHOSH A. K. · Metall. Trans. A · 1979 · 10 · 24110.1007/BF02658391 ↗
7. M. W. MAHONEY and R. CROOKS: in `Superplasticity in aerospace', (ed. H. C. Heikkenen and T. R. McNelley), 331–344; 1988, Warrendale, PA, TMS.
8. B. P. KASHYAP and A. K. MUKHERJEE: in 'Strength of metals and alloys', (ed. R. C. Gifkins), 707–712; 1982, Oxford, Pergamon Press.10.1016/B978-1-4832-8423-1.50116-4 ↗
9. 10.1007/BF0055302810.1007/BF00553028 ↗
10. KASHYAP B. P. · Res Mech · 1986 · 17 · 293
11. 10.1007/BF0264880210.1007/BF02648802 ↗
12. H. J. MCQUEEN and J. J. JONAS: in 'Plastic deformation of metals', (ed. R. J. Arsenault), 393–493; 1975, New York, Academic Press.10.1016/B978-0-12-341806-7.50014-3 ↗
13. 10.1016/0921-5093(94)90472-310.1016/0921-5093(94)90472-3 ↗
14. 10.1179/mst.1990.6.12.125110.1179/mst.1990.6.12.1251 ↗
15. 10.1007/BF0264357110.1007/BF02643571 ↗
16. 10.1063/1.170736310.1063/1.1707363 ↗
17. W. ROBERTS: in 'Deformation, processing, and structure', (ed. G. Krauss), 109–184; 1984, Metals Park, OH, ASM.
18. 10.1007/BF0264238310.1007/BF02642383 ↗
19. B. P. KASHYAP and A. K. MUKHERJEE: in `Superplasticity', (ed. B. Baudelet and M. Suery), 4.1-4.34; 1985, Paris, CNRS.
20. E. A. BRANDES and G. B. BROOKS (eds.): in `Smithells metals reference book', 7th edn, 13.1-13.119; 1992, Oxford, Butterworth-Heinemann.
21. J. PILLING and N. RIDLEY: in `Superplasticity in crystalline solids', 65–70, 153–154; 1989, London, The Institute of Metals.
22. T. H. COURTNEY: in 'Mechanical behavior of materials', 263–324; 1990, New York, McGraw-Hill.
23. 10.1007/BF0243164210.1007/BF02431642 ↗
24. K. A. PADMANABHAN and G. J. DAVIES: in `Superplasticity', 30–38; 1980, Berlin, Springer-Verlag.10.1007/978-3-642-81456-3 ↗