Pack codeposition of Al and Cr to form diffusion coatings resistant to high temperature oxidation and corrosion for γ-TiAl
Source abstract
Abstract
Thermochemical analyses were carried out for a series of pack powder mixtures formulated for codepositing Al with Cr to form diffusion coatings on γ-TiAl resistant to high temperature oxidation by the pack cementation process. Based on the results obtained, experimental studies were undertaken to identify optimum pack powder mixtures for codepositing Al with Cr to form diffusion coatings with an adherent and coherent coating structure. The results of the thermochemical calculations performed indicated that codeposition of Al and Cr is possible with CrCl 3 .6H 2 O and AlCl 3 activated pack powders containing elemental Al and Cr as depositing sources. However, experimental results obtained at 1100°C revealed that CrCl 3 .6H 2 O is not suitable for use as an activator for codepositing Al with Cr on γ-TiAl. It caused a significant degree of degradation indicated by weight losses instead of coating deposition to the substrate. However, adherent coatings with excellent structural integrity consisting of an outer Cr doped TiAl 3 layer containing Al 67 Cr 8 Ti 25 phase and an inner layer containing TiAl 3 and TiAl 2 phases were successfully codeposited at 1100°C using pack powder mixtures activated by AlCl 3 . It is suggested that such coatings were formed via a sequential deposition mechanism through inward diffusion of aluminium and chromium. Conditions that affect the pack codeposition process, and hence need to be carefully controlled, are discussed in relation to the mechanism of the formation of diffusion coatings with an integral structure free from microcracking on γ-TiAl.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Thermal and Kinetic Analysis · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. BRADY M. P. BRINDLEY W. J. SMIALEK J. L. and 1. E. LOCCI: JOM November 1996 (11) 46–50.10.1007/BF03223244 ↗
2. KAYSSER W.: Surf Eng. 2001 17 305–312.10.1179/026708401101517926 ↗
3. BHOWAL P. R. MERRICK H. F. and LARSEN D. E. JR: Mater. Set Eng. 1995 A19Z (193) 685–690.10.1016/0921-5093(94)03287-4 ↗
4. DATTA P. K. BURNELL GRAY J. S. and NATESAN K.: in Intermetallic compounds: principles and practice Vol. 3 Process’ (ed. Westbrook J. H and Fleischer R. L); 561-588 2001 New York John Wiley.10.1002/0470845856.ch27 ↗
5. BRADY M. P. GLEESON B. and WRIGHT I. G.: JOM January 2000 (1) 16–21.10.1007/s11837-000-0109-x ↗
6. 10.1557/PROC-288-95310.1557/PROC-288-953 ↗
7. 10.1023/A:101253422016510.1023/A:1012534220165 ↗
8. 10.1007/BF0035444510.1007/BF00354445 ↗
9. 10.1149/1.205917610.1149/1.2059176 ↗
10. 10.1149/1.205621910.1149/1.2056219 ↗
11. 10.1016/S0257-8972(02)00469-310.1016/S0257-8972(02)00469-3 ↗
12. ERIKSSON G., and HACK K.: Metall Trans. B, 1989, 21B, 1013–1023.10.1007/BF02670272 ↗
13. XIANG Z. D. BURNELL-GRAY J. S. and DATTA P. K.: Surf Eng. 2001 17 287–294.10.1179/026708401101517890 ↗
14. LEVINE S. R., and CAVES R. M.: J. Electrochem. Soc., 1988, 121, 731–741.
15. 10.1007/BF0259562510.1007/BF02595625 ↗
16. 10.1007/s11661-000-0157-410.1007/s11661-000-0157-4 ↗