journal article·1994-06

Adhesion of SM1140+ coatings to silicon carbide substrate in Sigma monofilament

R. A. Shatwell

Materials Science and Technology· Volume 10· Issue 6
Publisher page

Abstract

AbstractAbstractThe adhesion of carbon coatings to Sigma silicon carbide monofilament is primarily dependent on the electrical power used to heat the monofilament. The adherence of the coating can be detected by performing bend tests on the fibre. It is suggested that in order to bond the carbon to the surface, a chemical reaction involving the formation of SiCl4 takes place on the surface of the silicon carbide. This etches the surface and provides a good key for the carbon. If there is too little power the chemical reaction is suppressed. Too much power results in over etching and fibre damage. An additional factor of importance is the coefficient of thermal expansion of the coating. As power increases the carbon coefficient of thermal expansion reduces. The increased compressive stresses in the coating can lead to debonding.MST/3000
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (2)

Show source-provided references
1. 10.1007/BF0055209010.1007/BF00552090 ↗
2. BRUCE D. · J. Inst. Met. · 1969 · 97 · 140