journal article·1992-11

Structure–property relationships of SiC reinforced advanced Al–Zn–Mg–Cu alloy

C. H. J. Davies, N. Raghunathan, T. Sheppard

Materials Science and Technology· Volume 8· Issue 11
Publisher page

Abstract

he mechanical properties of extruded particulate composites of an enhanced 7000 series alloy have been examined and have been related to a macromodel of composite behaviour. The best tensile properties were found in the T6 condition: the 10 vol.-%SiC composite was found to have 624 MN m −2 proof stress, 690 MN m −2 ultimate tensile strength, 10% ductility (elongation), and 87 GN m −2 Young's modulus. As would be expected, the Young's modulus was found to increase with volume fraction of reinforcement and, at a level of 25 vol.-%SiC, was 112 GN m −2 . The tensile modulus of the unreinforced alloy was found to be 73 GN m −2 . An explanation for the variation of tensile property behaviour with heat treatment is proposed. The fracture toughness of the composites was determined via the short bar method; toughness values were high, ranging from 34 MN m −3/2 for 10 vol.-%SiC in the underaged temper to 19 MN m −3/2 for 20 vol.-%SiC in the overaged temper. The relationships between properties and microstructure are discussed. MST/1505
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. MCDANELS D. L. and HOFFMAN C. A.: NASA Technical paper 2302 Lewis Research Center Cleveland OH July 1984.
2. HATCH J.E. (ed.): ‘Aluminum — properties and physical metallurgy’ 184-189; 1984 Metals Park OH ASM.
3. RADOMSKY N., , KABISH O., , LOFFLER H., , LENDVAI J., , UNGAR T., , and HONYEK G.: J. Mater. Sci., 1979, 14, 2906.
4. STARKE E. A., Jr: J. Met., January 1970, 22, (1), 54.
5. R. J. ARSENAULT and R. M. FISHER: Scr. Metall., 1983, 17, 67.
6. 10.1016/0956-716X(90)90141-310.1016/0956-716X(90)90141-3 ↗
7. PETTY-GALLS J. L., and GOOLSBY R. D.: J. Mater. Sci., 1989, 24, 1439.
8. DAVIES C. H. J.: PhD thesis University of London 1990.
9. 10.1016/S0036-9748(88)80046-210.1016/S0036-9748(88)80046-2 ↗
10. 10.1179/mst.1992.8.10.86210.1179/mst.1992.8.10.862 ↗
11. 10.1016/0013-7944(84)90017-110.1016/0013-7944(84)90017-1 ↗
12. 10.1007/BF0285134910.1007/BF02851349 ↗
13. 10.1007/BF0281167910.1007/BF02811679 ↗
14. HUMPHREYS F. J.: in 9th Rises Int. Symp. on ‘Metallurgy and materials science’ ‘Mechanical properties and physical behav-iour of metallic and ceramic composites’ 51; 1988 Roskilde Denmark Riso National Laboratory.
15. 10.1007/BF0267230610.1007/BF02672306 ↗
16. HUNT W. H. JR O. RICHMOND and R. D. YOUNG: in ‘Proceedings of the sixth international conference on composite materials’ Vol. 2 (ed. Matthews F. L. et al.); 2.209; 1987 Amsterdam/ London Elsevier Applied Science.
17. 10.1007/BF0172916210.1007/BF01729162 ↗
18. KING J. E.: Met. Mater., 1989, 5, (12), 720.
19. FLOM Y. and ARSENAULT R. J.: in ‘Proceedings of the sixth international conference on composite materials’ Vol. 2 (ed. Matthews F. L. et al.) 2.189; 1987 Amsterdam/London Elsevier Applied Science.
20. LIU C. and LEWANDOWSKI J. J.: in Proc. Int. Symp. on ‘Advanced structural materials’ Vol. 9 (ed. Wilkinson D. S.) 23; 1988 Oxford Pergamon Press.
21. TAYA M. and ARSENAULT R. J.: in ‘Metal matrix composites — thetmomechanical behaviour’ 244; 1989 Oxford Pergamon Press.10.1016/B978-0-08-036984-6.50008-9 ↗
22. 10.1016/0036-9748(84)90262-X10.1016/0036-9748(84)90262-X ↗
23. ‘Engineering materials handbook’ Vol. 1 ‘Composites’ 58; 1987 Materials Park OH ASM International.
24. NAIR S. V., , TIEN J. K., , and BATES R. C.: /at. Met. Rev., 1985, 30, 275.
25. CROWE C. R. GRAY R. A. and HASSON D. F.: in ‘Proceedings of the fifth international conference on composite materials’ (ed. Harrigan W. C.Jr .) 483; 1985 Warrendale PA TMS.
26. MANOHARAN M., and LEWANDOWSKI J. J.: Scr. Metall., 1989, 23, 301.