Design of powder metallurgy aluminium alloys for applications at elevated temperatures Part 2 Tensile properties of extruded and Conformed gas atomised powders
Source abstract
Abstract
The effects of aging treatments on the tensile properties and microstructure of Al–Cr–Zr–Mn powder metallurgy aluminium alloys prepared from high pressure gas atomised powders were investigated. The alloy compositions were designed to give powders with or without Al13Cr2 intermetallics in the <45 μm size fraction. The Al–5·2Cr–1·4Zr–1·3Mn alloy is typical of the former (concentrated alloy) and the Al–3·3Cr–0·7Zr–0·7Mn alloy of the latter (dilute alloy). The alloys were prepared using a canning/degassing/extrusion sequence or the Conform consolidation process. Measurements of micro hardness and electron microscopy were used to correlate the microstructure with the tensile properties. The extruded powders of both alloys exhibited better properties than those of the Conformed powders. A large contribution to the strength of the extruded materials is made by their stabilised fine grain size. The dilute alloys had consistently better ductility. Neither alloy retained its strength after prolonged aging at 400°C, but the results indicate that a service temperature of 300°C may be possible.MST/1247b
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. C. M. ADAM and R. E. LEWIS: in ‘Rapidly solidified crystalline alloys’, (ed. S. K. Das et al.), 157; 1985, Warrendale, PA, The Metallurgical Society of AIME.
2. W. S. MILLER, I. R. HUGHES, I. G. PALMER, M. P. THOMAS, T. S. sAim, and J. WHITE: in ‘High strength powder metallurgy aluminium alloys II’, (ed. G. J. Hildeman and M. J. Koczak), 311; 1986, Warrendale, PA, The Metallurgical Society of AIME.
3. 10.1016/0025-5416(88)90143-710.1016/0025-5416(88)90143-7 ↗
4. 10.4028/www.scientific.net/KEM.29-31.78310.4028/www.scientific.net/KEM.29-31.783 ↗
5. 10.1179/mst.1991.7.4.33410.1179/mst.1991.7.4.334 ↗
6. GREEN D. · J. Inst. Met., · 1972 · 100 · 295
7. P. M. coos: paper presented at 1987 Powder Metallurgy Group Meeting on ‘Powder shaping and compacting’, Eastbourne, Oct. 1987.
8. CARNEY T. J. · Int. J. Rapid Solidification · 1990 · 5 · 189
9. 10.4028/www.scientific.net/KEM.29-31.29110.4028/www.scientific.net/KEM.29-31.291 ↗
10. N.J. E. ADKINS: PhD thesis, University of Surrey, 1989.
11. ADKINS N. J. E. · Int. J. Rapid Solidification
12. 10.1007/BF0110743510.1007/BF01107435 ↗
13. A. FONTAINE: in ‘Rapidly quenched metals II’, (ed. N. J. Grant and B. C. Giessen), 163; 1976, Cambridge, MA, MIT Press.
14. 10.2464/jilm.36.81910.2464/jilm.36.819 ↗
15. ASHBY M. · Z. Metallkd., · 1964 · 55 · 5
16. MILLER W. S. · European Patent 0 105 595, Alcan International, Banbury, 1984
17. 10.1016/0025-5416(69)90077-910.1016/0025-5416(69)90077-9 ↗
18. S. P. MIDSON: PhD thesis, University of Sheffield, 1982.
19. 10.1179/mst.1986.2.4.39410.1179/mst.1986.2.4.394 ↗
20. ADKINS N. J. E. · Int. J. Rapid Solidification