journal article·1996-12

Two component description of ductile to brittle transition in ferritic steel

S. R. Ortner, C. A. Hippsley

Materials Science and Technology· Volume 12· Issue 12
Publisher page

Abstract

Fracture initiation sites were located in Mn-Mo-Ni steel specimens broken at different temperatures in the transition region. The stresses and strains at these sites were determined, and the failure probabilities calculated. The data shows that brittle fracture throughout most of the transition region can be characterised by defining a critical stress σc and a critical probability of failure at the position at which σc is achieved. This description implies that the measured toughness transition temperature can be expected to increase with a decrease in σc, a decrease in the work to fracture, or an increase in yield stress. The variations in work to fracture with aging, proposed here to accommodate measured changes in toughness distributions, are consistent with the measured changes in phosphorus segregation with aging. The predicted proportionality between increase in yield stress and shift in transition temperature is similar to that found after irradiation.MST/3359
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fusion materials and technologies · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. S. G. DRUCE, G. p. GIBSON, and M. CAPE: in ‘Fracture mechanics: twenty-second symposium’, (ed. H. A. Ernst, A. Saxena, and D. L. McDowell), STP 1131, Vol. 1, 682; 1992, Philadelphia, PA, ASTM.
2. 10.1016/0001-6160(86)90222-110.1016/0001-6160(86)90222-1 ↗
3. VATTER I. A. · 1993
4. 10.1016/0308-0161(87)90007-X10.1016/0308-0161(87)90007-X ↗
5. T. J. WILLIAMS, P. R. BURCH, C. A. ENGLISH, and P. H. N. DE LA COUR RAY: in ‘Environmental degradation of materials in nuclear power systems—water reactors’, (ed. G. J. Theus and J. R. Weeks), 121; 1988, Warrendale, PA, TMS-AIME.
6. S. G. DRUCE, C. A. ENGLISH, A. J. E. FOREMAN, R. J. McELROY, I. A. VATTER, C. J. BOLTON, J. T. BUSWELL, and R. B. JONES. in ‘Effects of radiation on materials: 17th international symposium’, (ed. D. Gelles, R. K. Nanstad, A. S. Kumar, and E. A. Little), STP 1270; 1996, Philadelphia, PA, ASTM.
7. ODETTE G. R. · 1986 · 2 · 206
8. E. A. ALMOND, D. H. TIMBRES, and J. D. EMBURY: in ‘Proceedings of 2nd international conference on fracture (ICF 2)’, (ed. P. L. Prott), 235; 1969, London, Chapman and Hall.
9. E. SMITH: in ‘Physical basis of yield and fracture’, 36; 1966, London, Institute of Physics and Physics Society.
10. 10.1179/msc.1967.1.1.5610.1179/msc.1967.1.1.56 ↗
11. 10.1179/msc.1977.11.4.12310.1179/msc.1977.11.4.123 ↗
12. 10.1007/BF0264468510.1007/BF02644685 ↗
13. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
14. 10.1179/msc.1979.13.6.34110.1179/msc.1979.13.6.341 ↗
15. WALLIN K. · J. Phys. (France) IV, Colloque C7 · 1993 · 3 · 575
16. 10.1179/03063458479042038410.1179/030634584790420384 ↗
17. 10.1016/0022-5096(77)90003-510.1016/0022-5096(77)90003-5 ↗
18. ROSENFIELD A. R. · Metall. Trans. A · 1983 · 1410.1007/BF02645567 ↗
19. 10.1016/0956-716X(90)90073-P10.1016/0956-716X(90)90073-P ↗
20. I. A. VATTER: ‘High spatial resolution microanalysis of low alloy steels’, PhD thesis, Bath University, UK, 1993.
21. 10.1016/0001-6160(87)90119-210.1016/0001-6160(87)90119-2 ↗
22. 10.1016/0956-7151(94)90146-510.1016/0956-7151(94)90146-5 ↗
23. 10.1179/msc.1978.12.11.51110.1179/msc.1978.12.11.511 ↗
24. 10.1016/0036-9748(84)90503-910.1016/0036-9748(84)90503-9 ↗
25. 10.1016/0036-9748(83)90280-610.1016/0036-9748(83)90280-6 ↗
26. R. J. MCELROY and A. L. LOW: ‘Effects of radiation on materials: 17th international symposium’, (ed. D. S. Gelles, R. K. Nanstad, A. S. Kumar, and E. A. Little), STP 1270; 1996, Philadelphia, PA, ASTM.
27. G. R. ODETTE, P. M. LOMBROZO, and R. K. WULLAER: in ‘Effects of radiation on materials: 12th international symposium’, (ed. F. A. Garner and J. S. Perrin), STP 870, 840; 1985, Philadelphia, PA, ASTM.10.1520/STP87019850021 ↗