journal article·1986-09

Residual stresses in two laser surface melted stainless steels

M. Lamb, D. R. F. West, W. M. Steen

Publisher page

Abstract

Residual stresses were studied in two laser surface melted stainless steels: one martensitic, Fe–12Cr–0·2C, and the other austenitic, Fe–17Cr–11Ni–2·5Mo (compositions in wt-%). Stresses were measured by X-ray diffractometry over a range of depths, processing conditions, and stress relieving heat treatments. The volume increase associated with the martensitic transformation develops compressive stresses in single tracks of the martensitic steel and modifies the subsurface stresses of the laser surface melted steel. However, interactions between tracks offset the compressive surface stresses at all but the slightest overlaps. Residual stresses in the martensitic steel are minimized by increasing the advance between tracks and are reduced to a lesser extent by increasing the beam diameter and decreasing the traverse velocity. The austenitic steel, undergoing no solid state phase transformation on cooling, develops tensile residual stresses of the order of the yield stress for all the processing conditions evaluated. Suitable stress relieving heat treatments were identified for each steel.MST/422
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Laser and Thermal Forming Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. La ROCCA A. V. · Sci. Am., · 1979 · 246 · 80
2. 10.1063/1.32501510.1063/1.325015 ↗
3. s. A. DAVID and J. M. VITEK: in ‘Lasers in metallurgy’, (ed. K. Muckerjee and J. Mazumder), 247; 1981, New York, American Institute of Mining and Metallurgical Engineers.
4. P. A. MOLIAN: in ‘Rapidly solidified amorphous and crystalline alloys’, (ed. B. H. Kear et al.); 1982, Amsterdam, Elsevier.
5. 10.1149/1.211993010.1149/1.2119930 ↗
6. D. S. GNANAMUTHU: in ‘Applications of lasers in materials processing’, (ed. E. A. Metzbower), 177; 1979, Metals Park, Ohio, American Society of Metals.
7. 10.1149/1.212764910.1149/1.2127649 ↗
8. 10.1016/0010-938X(79)90025-810.1016/0010-938X(79)90025-8 ↗
9. PARLANE A. J. A. · ‘Residual stresses and their effects’ · 1981
10. 10.1007/BF0283326110.1007/BF02833261 ↗
11. 10.1016/0036-9748(84)90452-610.1016/0036-9748(84)90452-6 ↗
12. 10.1179/sur.1986.2.1.4310.1179/sur.1986.2.1.43 ↗
13. B. D. CULLITY: ‘Elements of X-ray diffraction’, 3 edn, 434; 1967, Reading, Mass., Addison-Wesley.
14. LONSDALE D. · SE/SSD/R/81/070, Central Electricity Generating Board, Gravesend · 1981
15. M. LAMB: PhD thesis, Imperial College of Science and Technology, 1985.
16. KOT R. A. · Metall. Trans., · 1970 · 1 · 268510.1007/BF03037802 ↗
17. J. WOOLMAN and R. A. MOTTRAM: ‘The mechanical and physical properties of the British Standard En steels’, 315; 1969, Oxford, Pergamon Press.