journal article·1992-04

Discontinuously reinforced intermetallic matrix composites via XD synthesis

K. S. Kumar, J. D. Whittenberger

Publisher page

Abstract

A review is given of recent results obtained for discontinuously reinforced intermetallic matrix composites produced using the XD process. Intermetallic matrixes investigated include NiAl, multiphase NiAl+Ni2AlTi, CoAl, near γ titanium aluminides (i.e. TiAl+Ti3Al), and L12 trialuminides containing minor amounts of second phase. A judicious match of the matrix and reinforcement can enhance both physical and mechanical properties. Particulate reinforcements can affect properties directly by enhancing modulus and strength or indirectly by refining grain size, enhancing microstructural homogeneity in a casting, or providing additional nucleation sites which improve phase transformation kinetics. Such mechanical properties as low and high temperature strength, compressive and tensile creep, elastic modulus, ambient ductility, and fracture toughness are discussed as functions of reinforcement size, shape, and volume fraction. Microstructures before and after deformation are examined and correlated with measured properties. An observation of interest in many of the systems examined is ‘dispersion weakening’ at high temperatures and high strain rates. This behaviour is not specific to the XD process; rather similar observations have been reported in other discontinuous composites. Proposed mechanisms for this behaviour are presented.MST/1561
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. 10.1007/BF0058487710.1007/BF00584877 ↗
2. J. D. WHITTENBERGER: in ‘Solid state powder processing’, (ed. A. H. Clauer and J. J. deBarbadillo), 137; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.
3. N. S. STOLOFF and D. E. ALMAN: in ‘Intermetallic matrix composites’, (ed. D. L. Anton et al.), Vol. 194, 31; 1990, Pittsburgh, PA, MRS.10.1557/PROC-194-31 ↗
4. 10.1098/rspa.1937.005610.1098/rspa.1937.0056 ↗
5. M. HANSEN and K. ANDERKO: ‘Constitution of binary alloys’; 1958, New York, NY, McGraw-Hill.10.1149/1.2428700 ↗
6. PETTIT F. S. · Trans. Met. Soc. AIME · 1967 · 239 · 1296
7. ROZNER A. G. · J. Inst. Met., · 1966 · 94 · 169
8. 10.1179/03063456879044347710.1179/030634568790443477 ↗
9. 10.1016/0036-9748(89)90083-510.1016/0036-9748(89)90083-5 ↗
10. VANDERVOORT R. R. · Trans. ASM · 1966 · 59 · 930
11. K. VEDULA and J. R. STEPHENS: in ‘High temperature ordered intermetallic alloys II’, (ed. N. S. Stoloff et al.), Vol. 81, 381; 1987, Pittsburgh, PA, MRS.10.1557/PROC-81-3 ↗
12. R. DAROLIA, D. F. LAHRMAN, R. D. FIELD, and A. J. FREEMAN: in ‘High temperature ordered intermetallic alloys III’, (ed. C. T. Liu et al.), Vol. 133, 113; 1989, Pittsburgh, PA, MRS.10.1557/PROC-133-113 ↗
13. R. D. FIELD, D. F. LAHRMAN, and R. DAROLIA: in ‘High temperature ordered intermetallic alloys IV’, (ed. L. Johnson et al.), Vol. 213; 1991, Pittsburgh, PA, MRS.10.1557/PROC-213-255 ↗
14. 10.1016/0025-5416(86)90289-210.1016/0025-5416(86)90289-2 ↗
15. G. SAURUORF: in ‘High temperature aluminides and inter-metallics’, (ed. S. H. Wang et al.), 329; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.
16. 10.1016/0036-9748(89)90230-510.1016/0036-9748(89)90230-5 ↗
17. 10.1016/0036-9748(89)90244-510.1016/0036-9748(89)90244-5 ↗
18. 10.1007/BF0117405910.1007/BF01174059 ↗
19. 10.1007/BF0116074410.1007/BF01160744 ↗
20. 10.1007/BF0264403610.1007/BF02644036 ↗
21. P. S. KHADKIKAR, K. VEDULA, and B. S. SHABEL: in ‘High temperature ordered intermetallic alloys II’, (ed. N. S. Stoloff et al.), Vol. 81, 157; 1987, Pittsburgh, PA, MRS.10.1557/PROC-81-3 ↗
22. 10.1557/JMR.1990.075410.1557/JMR.1990.0754 ↗
23. 10.1080/1478643700822106810.1080/14786437008221068 ↗
24. 10.1080/1478643720822034610.1080/14786437208220346 ↗
25. 10.1016/0022-5096(63)90060-710.1016/0022-5096(63)90060-7 ↗
26. 10.1007/BF0072068910.1007/BF00720689 ↗
27. 10.1007/BF0072289210.1007/BF00722892 ↗
28. 10.1007/BF0054418110.1007/BF00544181 ↗
29. 10.1016/0013-7944(77)90028-510.1016/0013-7944(77)90028-5 ↗
30. P. R. and B. H. KEAR: in ‘High temperature ordered intermetallic alloys I’, (ed. C. C. Koch et al.), Vol. 39, 279; 1985, Pittsburgh, PA, MRS.
31. 10.1557/JMR.1989.116410.1557/JMR.1989.1164 ↗
32. HOCKING L. A. · J. Inst. Met., · 1971 · 99 · 98
33. 10.1016/0025-5416(85)90298-810.1016/0025-5416(85)90298-8 ↗
34. 10.1007/BF0264787910.1007/BF02647879 ↗
35. 10.1520/JTE10976J10.1520/JTE10976J ↗
36. KIM Y.-W. · J. Met., · 1989 · 41 · 24
37. 10.1016/0956-716X(90)90124-Y10.1016/0956-716X(90)90124-Y ↗
38. 10.1016/0956-716X(90)90562-U10.1016/0956-716X(90)90562-U ↗
39. ADAMS M. L. · Int. J. Powder Metall., · 1990 · 26 · 33
40. 10.1016/S0036-9748(88)80024-310.1016/S0036-9748(88)80024-3 ↗
41. 10.1016/0036-9748(89)90419-510.1016/0036-9748(89)90419-5 ↗
42. 10.1016/0036-9748(89)90314-110.1016/0036-9748(89)90314-1 ↗
43. O. POPOOLA, C. CORDIER, P. PIROUZ, and A. H. HEUER: in ‘Interfaces in metal—ceramic composites’, (ed. R. Y. Lin et al.), 465; 1989, Warrendale, PA, The Minerals, Metals and Materials Society.
44. L. CHRISTODOULOU, P. A. PARRISH, and C. R. CROWE: in ‘High temperature/high performance composites’, (ed. F. D. Lemkey et al.), Vol. 120, 29; 1988, Pittsburgh, PA, MRS.10.1557/PROC-120-29 ↗
45. 10.1016/0956-716X(90)90047-K10.1016/0956-716X(90)90047-K ↗
46. 10.1007/BF0265681210.1007/BF02656812 ↗
47. 10.1080/0141861870820986910.1080/01418618708209869 ↗
48. M. YAMAGUCHI, Y. SHIRAI, and Y. UMAKOSHI: in ‘Dispersion strengthened aluminium alloys’, (ed. Y.W. Kim and W. M. Griffith), 721; 1988, Warrendale, PA, The Minerals, Metals and Materials Society.
49. UMAKOSHI Y. · A · 1988 · 58 · 651
50. 10.1016/0956-716X(90)90566-Y10.1016/0956-716X(90)90566-Y ↗
51. 10.1016/0956-716X(90)90191-I10.1016/0956-716X(90)90191-I ↗
52. K. S. KUMAR, S. A. BROWN, and J. D. WHITTENBERGER: in ‘High temperature ordered intermetallic alloys IV’, (ed. L. Johnson et al.), Vol. 213, 481; 1991, Pittsburgh, PA, MRS.
53. 10.1016/0956-716X(90)90534-N10.1016/0956-716X(90)90534-N ↗
54. 10.1016/S0036-9748(88)80094-210.1016/S0036-9748(88)80094-2 ↗
55. 10.1016/0956-716X(90)90066-P10.1016/0956-716X(90)90066-P ↗
56. K. S. KUMAR, M. S. DiPIETRO, and J. D. WHITTENBERGER: in ‘High temperature ordered intermetallic alloys IV’, (ed. L. Johnson et al.), Vol. 213, 1039; 1991, Pittsburgh, PA, MRS.10.1557/PROC-213-1039 ↗
57. 10.1557/JMR.1991.053010.1557/JMR.1991.0530 ↗
58. 10.1080/1478643750822810310.1080/14786437508228103 ↗
59. J. J. VALENCIA, J. P. A. LOIWANDER, J. ROSLER, C. G. LEVI, and R. MEHRABIAN: in Intermetallic matrix composites', (ed. D. L. Anton et al), Vol. 194, 89; 1990, Pittsburgh, PA, MRS.10.1557/PROC-194-89 ↗