Deformation mechanisms of high strength and plasticity Fe-24Mn-3.5Cr-0.4C austenitic steel at 4.2 K
Source abstract
Abstract
In this work, austenitic high-Mn steel that exhibits both high strength and plasticity at extremely low temperatures was designed and investigated, which demonstrates a yield strength of 1022 MPa, a tensile strength of 1532 MPa, and an elongation of 25% at 4.2 K, and enables potential operating in low-temperature structural materials. Compared to at room temperature, both the yield strength and the tensile strength of the high-Mn steel at low temperature increased, while the elongation at break decreased. A comparative study of its microstructural evolution was carried out using X-ray diffraction, transmission electron microscopy, and electron backscatter diffraction. The microstructure analysis revealed that the dislocations and nano-twinning control the strain-hardening behavior of the twinning-induced plasticity behavior of the Fe-24Mn-3.5Cr-0.4C steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Technical Institute of Physics and Chemistry
Centre of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
Shougang Research Institute of Technology
Funding
National Key Research and Development Program of China
References (44)
Show source-provided references
1. 10.1016/j.jmst.2020.07.00310.1016/j.jmst.2020.07.003 ↗
2. 10.1016/j.scriptamat.2004.02.03710.1016/j.scriptamat.2004.02.037 ↗
3. 10.1016/j.wear.2023.20464810.1016/j.wear.2023.204648 ↗
4. 10.1016/j.actamat.2015.09.06110.1016/j.actamat.2015.09.061 ↗
5. 10.1016/j.matdes.2018.01.02610.1016/j.matdes.2018.01.026 ↗
6. 10.1080/02670836.2020.174718710.1080/02670836.2020.1747187 ↗
7. 10.1016/j.matchar.2017.11.05410.1016/j.matchar.2017.11.054 ↗
8. Chen J, Ren JK, Liu ZY, et al. The essential role of niobium in high manganese austenitic steel for application in liquefied natural gas tanks. Mater Sci Eng A 2020; 772: 138733.
9. 10.1016/j.fusengdes.2005.06.07710.1016/j.fusengdes.2005.06.077 ↗
10. 10.1016/j.fusengdes.2007.07.03210.1016/j.fusengdes.2007.07.032 ↗
11. 10.1016/j.matdes.2023.11184010.1016/j.matdes.2023.111840 ↗
12. 10.1016/j.matchar.2024.11434010.1016/j.matchar.2024.114340 ↗
13. 10.1016/j.msea.2021.14088110.1016/j.msea.2021.140881 ↗
14. 10.1016/j.jmst.2021.01.08910.1016/j.jmst.2021.01.089 ↗
15. 10.1016/j.actamat.2015.08.02710.1016/j.actamat.2015.08.027 ↗
16. 10.1016/j.msea.2017.05.02310.1016/j.msea.2017.05.023 ↗
17. 10.1016/0036-9748(80)90110-610.1016/0036-9748(80)90110-6 ↗
18. 10.1016/j.msea.2006.12.17010.1016/j.msea.2006.12.170 ↗
19. 10.1016/j.msea.2018.10.10710.1016/j.msea.2018.10.107 ↗
20. 10.1016/j.actamat.2010.05.04910.1016/j.actamat.2010.05.049 ↗
21. 10.1016/j.msea.2015.11.09610.1016/j.msea.2015.11.096 ↗
22. 10.1016/j.scriptamat.2011.12.00510.1016/j.scriptamat.2011.12.005 ↗
23. 10.1016/j.actamat.2020.09.05210.1016/j.actamat.2020.09.052 ↗
24. 10.1007/s11661-013-2007-110.1007/s11661-013-2007-1 ↗
25. 10.1016/j.actamat.2016.01.03310.1016/j.actamat.2016.01.033 ↗
26. 10.1016/j.msea.2009.08.02810.1016/j.msea.2009.08.028 ↗
27. 10.1557/jmr.2018.25210.1557/jmr.2018.252 ↗
28. 10.1016/j.matdes.2010.01.04910.1016/j.matdes.2010.01.049 ↗
29. 10.1016/j.engfracmech.2020.10694910.1016/j.engfracmech.2020.106949 ↗
30. 10.1016/j.tafmec.2023.10404810.1016/j.tafmec.2023.104048 ↗
31. 10.1016/j.jmst.2021.08.05710.1016/j.jmst.2021.08.057 ↗
32. 10.3390/ma1619647310.3390/ma16196473 ↗
33. Sakurai T, Umezawa O. High-strength and high-toughness austenitic stainless steels based on type 316LN at 4.2K. Cryogenics 2023; 136: 103762.10.1016/j.cryogenics.2023.103762 ↗
34. Walsh RP Han K Toplosky VJ et al. Mechanical properties of modified JK2LB for Nb[sub 3]Sn CICC applications. 2010 pp. 17–24.10.1063/1.3402299 ↗
35. 10.1016/j.fusengdes.2013.05.00210.1016/j.fusengdes.2013.05.002 ↗
36. 10.1016/j.phpro.2015.06.19010.1016/j.phpro.2015.06.190 ↗
37. 10.1063/1.481368810.1063/1.4813688 ↗
38. 10.1007/s40843-018-9373-y10.1007/s40843-018-9373-y ↗
39. 10.1002/adem.20120032710.1002/adem.201200327 ↗
40. 10.1007/s11661-009-0050-810.1007/s11661-009-0050-8 ↗
41. 10.1016/j.actamat.2012.03.03510.1016/j.actamat.2012.03.035 ↗
42. 10.1016/j.jallcom.2019.15240710.1016/j.jallcom.2019.152407 ↗
43. Yang F, Dong L, Cai L, et al. Mechanical properties of FeMnCoCr high entropy alloy alloyed with C/Si at low temperatures. J Alloys Compd 2021; 859: 157876.10.1016/j.jallcom.2020.157876 ↗
44. 10.1016/j.matdes.2015.07.07210.1016/j.matdes.2015.07.072 ↗