Hot deformation behavior study and constitutive modeling of Ferrium ® C64 carburizing steel
Source abstract
Abstract
The hot deformation behavior of Ferrium ® C64 (Fe-16Co-7.5Ni-0.1C) alloy was studied using isothermal uniaxial hot compression tests (HCT) from 1123K to 1423K and strain rates of 0.01 to 10 s −1 . The Arrhenius hyperbolic sine law modeled the flow behavior with an R² of 0.99. Material constants and a deformation activation energy of 488 ± 23 kJ/mol at peak stress were determined. Microstructure using optical microscopy and EBSD analysis and phase identification using XRD were conducted. Flow stress analysis revealed strain hardening at low temperatures/high strain rates and dynamic recrystallization (DRX) at high temperatures/slow strain rates. The strain rate sensitivity map showed positive strain rate sensitivity (m) over the investigated domain and optimal processing parameters for hot working is recommended.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hindustan Aeronautics Limited
National Institute of Technology, Tiruchirappalli
Funding
Hindustan Aeronautics Limited
References (48)
Show source-provided references
1. 10.1088/2053-1591/ac05fc10.1088/2053-1591/ac05fc ↗
2. Waden GJ Coy JJ. Summary of drive-train component technology in helicopters. 1985.
3. Stott WR. Myths and miracles of gear coatings. Gear Technol 1999; 16: 35–44.
4. Wright JA, Sebastian JT, Kern CP, et al. Design, development and application of new high-performance gear steels. Am Gear Manuf Assoc Fall Tech Meet 2009 ; 2009: 182–194.
5. Sebastian J, Grabowski J, Snyder D. New high performance gear steels for rotorcraft transmission. In: International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE, 2013, pp.1–5.
6. Fadel D, Guttmann GM, Grinberg E, et al. Effects of Heat Treatment on Mechanical Properties and Microstructure of Low Carbon Steel ‘Ferrium C64’. SSRN Electronic Journal. Epub ahead of print 2022. DOI: https://doi.org/10.2139/ssrn.3989654
7. 10.1063/1.170736310.1063/1.1707363 ↗
8. Chen R, Zhang S, Liu X, et al. A flow stress model of 300 m steel for isothermal tension. Materials (Basel) 2021; 14: 1–13.
9. 10.1016/j.jmrt.2020.01.02010.1016/j.jmrt.2020.01.020 ↗
10. 10.1016/j.intermet.2019.10663210.1016/j.intermet.2019.106632 ↗
11. 10.1515/htmp-2021-001010.1515/htmp-2021-0010 ↗
12. Akanuma T, Matsumoto H, Chiba A, et al. Construction of processing maps with high precision for Ti-10V-2Fe-3Al alloy. In: Ti 2011 - Proceedings of the 12th World Conference on Titanium, 2012, pp.269–273.
13. 10.1016/j.jmrt.2023.06.19510.1016/j.jmrt.2023.06.195 ↗
14. 10.1111/j.1444-0938.1971.tb00039.x10.1111/j.1444-0938.1971.tb00039.x ↗
15. 10.1016/j.matdes.2015.12.07710.1016/j.matdes.2015.12.077 ↗
16. 10.1016/j.mtcomm.2023.10564810.1016/j.mtcomm.2023.105648 ↗
17. Guo-zheng Q. Recent developments in the study of recrystallization. 1st ed. Croatia: InTech. Epub ahead of print 6 February 2013. DOI: https://doi.org/10.5772/56031
18. 10.1016/j.commatsci.2010.07.02110.1016/j.commatsci.2010.07.021 ↗
19. 10.1016/j.commatsci.2011.11.03110.1016/j.commatsci.2011.11.031 ↗
20. 10.1007/s40195-014-0047-110.1007/s40195-014-0047-1 ↗
21. Laber KB, Leszczyńska-madej B. Theoretical and experimental analysis of the hot torsion process of the hardly deformable 5XXX series aluminium alloy. Materials (Basel) 14, Epub ahead of print 2021. DOI: https://doi.org/10.3390/ma14133508
22. 10.1016/j.jmatprotec.2004.04.17110.1016/j.jmatprotec.2004.04.171 ↗
23. 10.1016/j.prostr.2022.12.27810.1016/j.prostr.2022.12.278 ↗
24. Prasad YVRK, Rao KP, Sasidhara S. Hot working guide. 2nd Edition. ASM International, 2015. http://linkinghub.elsevier.com/retrieve/pii/B978008033454750019X
25. 10.1007/BF0266490210.1007/BF02664902 ↗
26. Li Q, Bu H, Han J, et al. Dynamic recrystallization behavior and processing maps of 5CrNiMoV steel during hot deformation. Mater Res Express 10, Epub ahead of print 2023. DOI: https://doi.org/10.1088/2053-1591/acce22
27. 10.1080/02670836.2018.143769110.1080/02670836.2018.1437691 ↗
28. 10.1007/s11661-018-4795-910.1007/s11661-018-4795-9 ↗
29. 10.1016/j.matchemphys.2021.12494810.1016/j.matchemphys.2021.124948 ↗
30. 10.1016/1359-6462(96)00134-010.1016/1359-6462(96)00134-0 ↗
31. 10.1016/j.msea.2013.03.08710.1016/j.msea.2013.03.087 ↗
32. 10.1007/BF0322310610.1007/BF03223106 ↗
33. 10.1016/j.msea.2012.12.07710.1016/j.msea.2012.12.077 ↗
34. Zhang J, Liu Z, Shi D. Hot Compression Deformation Behavior and Microstructure of As-Cast and Homogenized AA2195 Al-Li Alloy. Metals (Basel) 12, Epub ahead of print 2022. DOI: https://doi.org/10.3390/met12101580
35. 10.2320/matertrans.M201005610.2320/matertrans.M2010056 ↗
36. 10.1179/02670830110151084310.1179/026708301101510843 ↗
37. 10.1016/j.jallcom.2018.08.01010.1016/j.jallcom.2018.08.010 ↗
38. 10.1361/10599490177034459310.1361/105994901770344593 ↗
39. 10.1016/j.jmatprotec.2004.03.02910.1016/j.jmatprotec.2004.03.029 ↗
40. 10.1016/j.matdes.2011.12.01910.1016/j.matdes.2011.12.019 ↗
41. 10.3390/met901000110.3390/met9010001 ↗
42. Zhang Q, Zuo J, Yang C, et al. Investigation of deformation behavior and strain-induced precipitations in al–zn–mg–cu alloys across a wide temperature range. Sci Rep 2024; 14: 1–22.
43. 10.1016/j.mechrescom.2008.06.01110.1016/j.mechrescom.2008.06.011 ↗
44. 10.1016/S0921-5093(97)00424-310.1016/S0921-5093(97)00424-3 ↗
45. Lv Z, Zhang X, Huang X, et al. EBSD characterization of deformed lath martensite in if steel. IOP Conf Ser Mater Sci Eng 219, Epub ahead of print 2017. DOI: https://doi.org/10.1088/1757-899X/219/1/012033
46. Technology C. Ferrium ® C64. 2022; 1–7.
47. 10.1016/0001-6160(66)90207-010.1016/0001-6160(66)90207-0 ↗
48. 10.1016/0001-6160(76)90039-010.1016/0001-6160(76)90039-0 ↗