Experimental and constitutive assessment of tensile flow behavior of AA5083 alloy with microstructural evolution at warm temperatures
Source abstract
Abstract
The tensile stress-strain response of the AA5083 alloy was investigated over a temperature range of 25 to 300 °C, and strain rate range of 0.001 to 0.1 s −1 . A positive sensitivity to temperature along with a small positive correlation with strain rate at elevated temperatures was observed. The developed artificial neural network (ANN) based constitutive model depicted a superior predictability with average absolute relative error of 1.77% as compared to 3.42% and 4.26% for Johnson-Cook (J-C) and Modified Arrhenius (M-A) models, respectively. The detailed microstructural study of strained tensile samples depicted the occurrence of dynamic recovery confirmed by the maximum Kernel Average Misorientation value of 0.84° at 0.01 s −1 strain rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Indian Institute of Technology Bombay
Metals & Mining Department, Aditya Birla Science and Technology Company Private Limited
References (75)
Show source-provided references
1. Bumiller E. Intergranular corrosion in AA5XXX aluminum alloys with discontinuous precipitation at the grain boundaries. PhD Thesis.
2. 10.5006/181810.5006/1818 ↗
3. 10.1016/S0924-0136(99)00057-610.1016/S0924-0136(99)00057-6 ↗
4. 10.5957/JSPD.0222001010.5957/JSPD.02220010 ↗
5. Thiyaneshwaran N, Sureshkumar P. Microstructure, mechanical and wear properties of aluminum 5083 alloy processed by equal channel angular extrusion. Int J Eng Res Technol 2013; 2: 17–24.
6. 10.1179/02670830322501071310.1179/026708303225010713 ↗
7. 10.1016/j.matdes.2008.04.06310.1016/j.matdes.2008.04.063 ↗
8. 10.1007/s00170-019-04587-010.1007/s00170-019-04587-0 ↗
9. Ozturk F, Toros S, Kilic S. Evaluation of tensile properties of 5052 type aluminum-magnesium alloy at warm temperatures. Arch Mater Sci Eng 2008; 34: 95–98.
10. 10.1016/S0749-6419(99)00021-210.1016/S0749-6419(99)00021-2 ↗
11. 10.1016/S0924-0136(00)00635-X10.1016/S0924-0136(00)00635-X ↗
12. 10.1007/s11661-002-0096-310.1007/s11661-002-0096-3 ↗
13. 10.1016/j.pmatsci.2013.09.00210.1016/j.pmatsci.2013.09.002 ↗
14. 10.1142/S021968671850032410.1142/S0219686718500324 ↗
15. 10.1142/S021968671450007310.1142/S0219686714500073 ↗
16. Ahmad S, Alankar A, Tathavadkar V, et al. Investigation of tensile flow behavior of Al–Mg alloy at warm temperature: constitutive modelling and microstructural evolution. Metals Mater Int 2024: 1–18.
17. 10.1016/j.msea.2019.13832510.1016/j.msea.2019.138325 ↗
18. 10.1016/j.msea.2003.08.02710.1016/j.msea.2003.08.027 ↗
19. 10.1016/j.matchemphys.2022.12697610.1016/j.matchemphys.2022.126976 ↗
20. 10.1038/s41598-023-40527-510.1038/s41598-023-40527-5 ↗
21. 10.1016/0001-6160(66)90207-010.1016/0001-6160(66)90207-0 ↗
22. 10.1063/1.170736310.1063/1.1707363 ↗
23. Johnson GR. A constitutive model and date for metals subject to large strains, high strain rate and high temperatures. In: Proc. of 7th Int. Symp. on Ballistics, The Hague, 1983.
24. 10.1142/S021968672350001410.1142/S0219686723500014 ↗
25. 10.1007/BF0160509010.1007/BF01605090 ↗
26. 10.1016/j.jallcom.2013.03.02210.1016/j.jallcom.2013.03.022 ↗
27. 10.1016/j.cja.2022.07.01010.1016/j.cja.2022.07.010 ↗
28. 10.1016/j.matdes.2010.11.00410.1016/j.matdes.2010.11.004 ↗
29. 10.1016/j.matchar.2018.04.02510.1016/j.matchar.2018.04.025 ↗
30. 10.1515/htmp-2016-023410.1515/htmp-2016-0234 ↗
31. Nayak S, Dhondapure P, Singh AK, et al. Assessment of constitutive models to predict high temperature flow behaviour of Ti-6Al-4V preform. Adv Mater Proc Technol 2020; 6: 244–258.
32. 10.1142/S021968671550013410.1142/S0219686715500134 ↗
33. 10.1142/S021968672150038410.1142/S0219686721500384 ↗
34. 10.1179/03063458479041985410.1179/030634584790419854 ↗
35. 10.1179/mst.1994.10.9.77110.1179/mst.1994.10.9.771 ↗
36. Testing AICE-28 on M. Standard test methods for tension testing of metallic materials. ASTM international, 2016.
37. 10.1016/j.msea.2014.01.02710.1016/j.msea.2014.01.027 ↗
38. 10.1107/S002188981204914X10.1107/S002188981204914X ↗
39. 10.31399/asm.hb.v14a.a000402910.31399/asm.hb.v14a.a0004029 ↗
40. Dieter GE, Kuhn HA, Semiatin SL. Handbook of workability and process design. ASM international, 2003.
41. 10.1007/s11661-002-0096-310.1007/s11661-002-0096-3 ↗
42. 10.1179/imtlr.1972.17.1.110.1179/imtlr.1972.17.1.1 ↗
43. 10.1016/j.matdes.2010.11.04810.1016/j.matdes.2010.11.048 ↗
44. 10.1016/j.msea.2008.11.01710.1016/j.msea.2008.11.017 ↗
45. 10.1016/j.jallcom.2009.09.18710.1016/j.jallcom.2009.09.187 ↗
46. 10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
47. 10.1016/j.ijplas.2011.12.00110.1016/j.ijplas.2011.12.001 ↗
48. 10.1016/j.procir.2015.03.05210.1016/j.procir.2015.03.052 ↗
49. 10.1061/(ASCE)MT.1943-5533.000315410.1061/(ASCE)MT.1943-5533.0003154 ↗
50. Harikeshava R, Srinivasan MS, Vignesh RV, et al. ANN Model for predicting the intergranular corrosion susceptibility of friction stir processed aluminium alloy AA5083. In: 2017 2nd International Conference on Communication and Electronics Systems (ICCES), 2017, pp. 716–720. IEEE.
51. Vijayakumar S, Kakkassery JJ, Maniraj J, et al. ANN Modeling and optimization of friction stir welding performance for AA6061 and AA5083 alloy joints. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2024: 09544089241283272.
52. Basak H, Ozkan M, Toktas İ. Experimental research and ANN modeling on the impact of the ball burnishing process on the mechanical properties of 5083 Al-Mg material. Kovové Materiály-Metallic Mater 57.
53. 10.3390/computation1105010010.3390/computation11050100 ↗
54. 10.3103/S106782122002009110.3103/S1067821220020091 ↗
55. 10.1016/j.jmatprotec.2007.05.02710.1016/j.jmatprotec.2007.05.027 ↗
56. 10.3390/ma1514496510.3390/ma15144965 ↗
57. 10.1016/j.msea.2003.10.29210.1016/j.msea.2003.10.292 ↗
58. 10.1016/j.msea.2020.13915110.1016/j.msea.2020.139151 ↗
59. 10.1007/978-3-030-36408-3_4110.1007/978-3-030-36408-3_41 ↗
60. 10.1179/mtlr.1970.15.1.10110.1179/mtlr.1970.15.1.101 ↗
61. 10.1016/j.scriptamat.2019.08.02410.1016/j.scriptamat.2019.08.024 ↗
62. 10.1016/0036-9748(87)90435-210.1016/0036-9748(87)90435-2 ↗
63. 10.1016/j.msea.2015.10.05310.1016/j.msea.2015.10.053 ↗
64. 10.1063/2.110110710.1063/2.1101107 ↗
65. Kubin LP, Estrin Y. Dynamic strain ageing and the mechanical response of alloys. J de Physique III 1991; 1: 929–943.
66. Callister WDJr. Materials science and engineering an introduction. 2007.
67. 10.1016/0001-6160(81)90112-710.1016/0001-6160(81)90112-7 ↗
68. George EJr. Mechanical metallurgy. Mc Graw Hill, 1961.
69. 10.1017/S143192761100005510.1017/S1431927611000055 ↗
70. 10.1016/S1359-6462(02)00235-X10.1016/S1359-6462(02)00235-X ↗
71. 10.1007/s10853-022-07036-810.1007/s10853-022-07036-8 ↗
72. 10.3390/ma1202031110.3390/ma12020311 ↗
73. Rollett AD, Alvi M, Brahme A, et al. Texture-dependent recrystallization in aluminum 1050. Mater Forum 2004: 1173–1178.
74. Kazaoka T, Zhou DH, Kataoka N, et al. Microstructural evolution of AA5052 alloy sheets in high-speed rolling. Adv Mat Res 2014; 922: 344–349.
75. 10.1088/2053-1591/ac6b8d10.1088/2053-1591/ac6b8d ↗