Chloride ion and polyethylene glycol: Improving the microstructure and enhancing the mechanics of electrolytic copper foil
Source abstract
Abstract
This study examines the effects of chloride ions (Cl − ) and polyethylene glycol (PEG) on the properties of ultra-thin electrolytic copper foils. By varying the concentrations of Cl − and PEG, we investigated changes in surface morphology, mechanical properties, and microstructure using scanning electron microscopy (SEM), nanoindentation tests, X-ray diffraction (XRD), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). Our findings show that increasing Cl − concentration generally leads to smoother and more uniform surface morphologies. An optimal combination of 30 mg/L Cl − and 5 mg/L PEG resulted in a notably smooth and flat copper surface. Mechanical testing demonstrated significant enhancements in both Young's modulus and hardness at these additive concentrations. XRD and EBSD analyses indicated a favorable shift in the crystallographic orientation of the copper grains, promoting more uniform grain growth. TEM analysis underscored the role of nano-twins and dislocations in strengthening the material. These results suggest that a precise balance of Cl − and PEG in the electrolyte can improve the quality and performance of ultra-thin copper foils, providing a basis for further optimization in industrial applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangxi University of Science and Technology
Research and Development Department, Jiangxi Tongbo Technology Co., Fuzhou, China
Funding
Jiangxi University of Science and Technology
References (41)
Show source-provided references
1. 10.1016/j.jpowsour.2019.22697310.1016/j.jpowsour.2019.226973 ↗
2. 10.1016/j.jcis.2020.09.09610.1016/j.jcis.2020.09.096 ↗
3. 10.1016/j.jelechem.2022.11649510.1016/j.jelechem.2022.116495 ↗
4. 10.1007/BF0024374310.1007/BF00243743 ↗
5. 10.1016/j.msea.2015.08.01210.1016/j.msea.2015.08.012 ↗
6. 10.1016/j.mtcomm.2023.10595210.1016/j.mtcomm.2023.105952 ↗
7. 10.1016/j.electacta.2005.03.05110.1016/j.electacta.2005.03.051 ↗
8. 10.3365/KJMM.2021.59.5.30410.3365/KJMM.2021.59.5.304 ↗
9. 10.1016/j.jallcom.2021.16104410.1016/j.jallcom.2021.161044 ↗
10. 10.1016/j.jpowsour.2017.02.04110.1016/j.jpowsour.2017.02.041 ↗
11. 10.1016/j.tsf.2013.03.07510.1016/j.tsf.2013.03.075 ↗
12. 10.20964/2021.02.4010.20964/2021.02.40 ↗
13. 10.3365/KJMM.2016.54.9.68110.3365/KJMM.2016.54.9.681 ↗
14. 10.1149/1.243468210.1149/1.2434682 ↗
15. Garrido MH, Pritzker M. Inhibition of copper deposition by polyethylene glycol and chloride: iI. Analysis and application. J Electrochem Soc 2009; 156: D175.
16. 10.1149/1.143071910.1149/1.1430719 ↗
17. 10.1016/j.electacta.2020.13680310.1016/j.electacta.2020.136803 ↗
18. 10.1007/s10800-022-01707-910.1007/s10800-022-01707-9 ↗
19. 10.1007/s13391-012-2125-810.1007/s13391-012-2125-8 ↗
20. 10.1016/j.electacta.2012.05.11910.1016/j.electacta.2012.05.119 ↗
21. 10.1016/j.mee.2003.10.00810.1016/j.mee.2003.10.008 ↗
22. Nagayama T Yoshida H Shohji I. Effect of additives in an electrolyte on mechanical properties of electrolytic copper foil. In: ASME 2013 international technical conference and exhibition on packaging and integration of electronic and photonic microsystems Burlingame USA: ASME; 2013 pp. 1–5.10.1115/IPACK2013-73172 ↗
23. Liu J Sun W Bai Z et al. Influences of composite additives and technological parameters on the microstructure and properties of electrolytic copper foil. Preprint 2023.10.21203/rs.3.rs-3141829/v1 ↗
24. 10.1016/j.electacta.2013.12.11210.1016/j.electacta.2013.12.112 ↗
25. 10.1149/2.0481713jes10.1149/2.0481713jes ↗
26. 10.1016/j.compositesb.2020.10784110.1016/j.compositesb.2020.107841 ↗
27. 10.1149/2.0101712jes10.1149/2.0101712jes ↗
28. 10.1016/j.mseb.2023.11696910.1016/j.mseb.2023.116969 ↗
29. 10.1016/j.surfcoat.2021.12688110.1016/j.surfcoat.2021.126881 ↗
30. 10.1179/174591909X42480710.1179/174591909X424807 ↗
31. 10.1016/S1003-6326(17)60189-410.1016/S1003-6326(17)60189-4 ↗
32. 10.1016/j.est.2024.11088010.1016/j.est.2024.110880 ↗
33. 10.1016/j.jmrt.2023.03.12710.1016/j.jmrt.2023.03.127 ↗
34. 10.1149/1.242555810.1149/1.2425558 ↗
35. 10.1016/j.actamat.2011.07.04410.1016/j.actamat.2011.07.044 ↗
36. 10.1016/j.matdes.2024.11304110.1016/j.matdes.2024.113041 ↗
37. 10.1016/j.cej.2024.14955710.1016/j.cej.2024.149557 ↗
38. 10.1016/j.matchar.2023.11328610.1016/j.matchar.2023.113286 ↗
39. 10.1016/j.jelechem.2021.11562410.1016/j.jelechem.2021.115624 ↗
40. 10.1021/acs.jpcc.3c0428610.1021/acs.jpcc.3c04286 ↗
41. 10.1016/j.electacta.2020.13593110.1016/j.electacta.2020.135931 ↗