Precipitation strengthening behavior of Custom 455 stainless steel during tempering at 420 °C
Source abstract
Abstract
After solid solution at 850 °C, the Custom 455 was aged at 420 °C for different times. The hardness changes were measured using a Vickers hardness tester, and the microstructure and composition of the second phase were studied using atom probe tomography (APT) and high-resolution transmission electron microscopy (HRTEM). The APT results indicate that in the early stage of aging, Cu atoms first segregate and attract Ti to form CuTi clusters; As the aging time increases, Ti atoms in CuTi clusters attract Ni and form CuTiNi clusters, resulting in a rapid increase in sample hardness; Subsequently, CuNiTi clusters grew and gradually separated into Cu-rich and NiTi-rich particles; As the aging time further increases, some NiTi-rich particles grow into rod-shaped Ni 3 Ti precipitates, while others have Si atoms and grow into spherical G phase particles. The orientation relationship between Cu-rich phase, Ni 3 Ti phase, and G phase is: [100] M //[0–11] Cu //[-12–10] Ni3Ti //[100] G , (011) M //(111) Cu //(0004) Ni3Ti //(022) G . The formation of the Cu-rich, Ni 3 Ti, and G phase resulted in a hardness peak of 538 HV after 16 h of aging. Subsequently, the decrease in hardness caused by the coarsening of the Cu-rich and Ni 3 Ti particles was offset by the newly formed G phase, resulting in a slow decrease in hardness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Materials, School of Materials Science and Engineering, Shanghai University, Shanghai, PR China
Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, PR China
References (19)
Show source-provided references
1. 10.1016/j.actamat.2010.03.01010.1016/j.actamat.2010.03.010 ↗
2. 10.1533/9781845696931.10910.1533/9781845696931.109 ↗
3. Uchida JM. Evaluation of carpenter Custom 455. Evaluation of carpenter custom. 1970.
4. Montano JW. A mechanical property and stress corrosion evaluation of Custom 455 stainless steel alloy. 1972.
5. Douthett J. Heat treating of stainless steels. ASM Metals Handbook Volume 4 - Heat Treating. 1991.
6. 10.1016/S1359-6454(98)00267-510.1016/S1359-6454(98)00267-5 ↗
7. 10.1007/BF0265232310.1007/BF02652323 ↗
8. 10.1002/sia.251410.1002/sia.2514 ↗
9. Ma SY. Study on the control of microstructure uniformity and strengthening and toughening mechanism of maraging steel. MSc Thesis[D] Shenyang University of Technology 2021.
10. 10.1016/j.actamat.2016.11.05210.1016/j.actamat.2016.11.052 ↗
11. 10.7498/aps.28.31410.7498/aps.28.314 ↗
12. 10.2320/matertrans.46.281710.2320/matertrans.46.2817 ↗
13. 10.1016/j.actamat.2019.08.04210.1016/j.actamat.2019.08.042 ↗
14. 10.1016/j.actamat.2021.11687810.1016/j.actamat.2021.116878 ↗
15. 10.1007/BF0264606110.1007/BF02646061 ↗
16. 10.1016/j.actamat.2010.02.02810.1016/j.actamat.2010.02.028 ↗
17. Schulz-Beeker AS, Hougardy HP. Developement of high-strength martensite by age-hardening of coherent intermetallic precipitates. EDP Sci 1989: 473–480. DOI:https://doi.org/10.1051/esomat/198909004
18. 10.2355/tetsutohagane1955.72.2_24910.2355/tetsutohagane1955.72.2_249 ↗
19. 10.1179/mst.1992.8.6.54610.1179/mst.1992.8.6.546 ↗