journal article·2025-12

Comparison of copper-based composites fabricated by cross-accumulative roll bonding method for packaging design

Yaxin Wei, Duan Ran, Yashar Piri, Maryam Zandi, Ali Pashapour

Materials Science and Technology· Volume 41· Issue 18
Publisher page

Abstract

Copper-based composites have interesting properties and they are widely used in electronics, packaging, and automotive applications. In the present work, the cross-accumulative roll bonding (CARB) process was used to fabricate Cu-based composites with Zn and Brass reinforcing layers. The experimental observations revealed a clear relationship between rolling strain and plastic instabilities including the necking and rupture of reinforcement. However, the grain refinement was observed on Cu, Zn, and Brass layers after seven CARB cycles, indicating the positive impact of rolling rotation on obtaining the ultrafine grains. Better ductility of Brass also resulted in finer grains. This also led to more significant improvement in mechanical properties. During the CARB process, the hardness of Zn and Brass increased from 59 HV and 250 HV to 89 HV and 310 HV, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hubei University of Technology

Golestan University

References (63)

Show source-provided references
1. 10.1016/j.jmst.2024.03.01410.1016/j.jmst.2024.03.014 ↗
2. Shao L, Zhang S, Hu L, et al. Influence of heat treatment condition on the microstructure. Microhardness and Corrosion Resistance of Ag-Sn-In-Ni-Te Alloy Wire, Materials 2024; 17: 2785.
3. 10.1016/j.ijfatigue.2023.10777810.1016/j.ijfatigue.2023.107778 ↗
4. 10.1016/j.ijmecsci.2023.10884010.1016/j.ijmecsci.2023.108840 ↗
5. 10.1016/j.precisioneng.2024.02.01710.1016/j.precisioneng.2024.02.017 ↗
6. 10.1016/j.msea.2022.14348510.1016/j.msea.2022.143485 ↗
7. 10.1016/j.jallcom.2022.16799810.1016/j.jallcom.2022.167998 ↗
8. 10.1007/s40194-022-01261-010.1007/s40194-022-01261-0 ↗
9. 10.1016/j.jmst.2024.01.06910.1016/j.jmst.2024.01.069 ↗
10. 10.1016/j.matchar.2023.11338910.1016/j.matchar.2023.113389 ↗
11. 10.1016/j.ijrmhm.2023.10634910.1016/j.ijrmhm.2023.106349 ↗
12. 10.1016/j.compositesb.2021.10924010.1016/j.compositesb.2021.109240 ↗
13. 10.1007/s40195-015-0237-510.1007/s40195-015-0237-5 ↗
14. Gebrehiwet L, Abate E, Negussie Y, et al. Application of composite materials in aerospace & automotive industry. International Journal of Advances in Engineering and Management (IJAEM) 2023; 5: 697–723.
15. 10.1016/j.ijplas.2023.10357310.1016/j.ijplas.2023.103573 ↗
16. 10.1016/j.jmst.2022.11.06110.1016/j.jmst.2022.11.061 ↗
17. 10.1016/j.msea.2023.14496510.1016/j.msea.2023.144965 ↗
18. 10.1016/j.tws.2024.11186210.1016/j.tws.2024.111862 ↗
19. 10.1016/j.wear.2024.20526510.1016/j.wear.2024.205265 ↗
20. 10.3389/fmats.2023.113540710.3389/fmats.2023.1135407 ↗
21. 10.1016/j.jmrt.2023.11.06610.1016/j.jmrt.2023.11.066 ↗
22. 10.1016/j.jmatprotec.2017.03.02210.1016/j.jmatprotec.2017.03.022 ↗
23. 10.1016/j.jmrt.2022.01.02610.1016/j.jmrt.2022.01.026 ↗
24. 10.1007/s12540-023-01557-w10.1007/s12540-023-01557-w ↗
25. 10.1016/j.rcim.2023.10264710.1016/j.rcim.2023.102647 ↗
26. 10.1016/j.eswa.2023.12146510.1016/j.eswa.2023.121465 ↗
27. 10.1520/JTE2018003210.1520/JTE20180032 ↗
28. 10.1016/j.compstruct.2023.11736910.1016/j.compstruct.2023.117369 ↗
29. 10.1016/j.matchar.2021.11138510.1016/j.matchar.2021.111385 ↗
30. 10.3390/ma1322517110.3390/ma13225171 ↗
31. 10.1016/j.jma.2022.08.00110.1016/j.jma.2022.08.001 ↗
32. 10.1016/j.jmrt.2023.08.00610.1016/j.jmrt.2023.08.006 ↗
33. 10.1016/j.jmrt.2023.02.14810.1016/j.jmrt.2023.02.148 ↗
34. 10.1016/j.intermet.2022.10746310.1016/j.intermet.2022.107463 ↗
35. 10.1016/j.matdes.2021.10945510.1016/j.matdes.2021.109455 ↗
36. 10.1179/026708310X1281599241825610.1179/026708310X12815992418256 ↗
37. 10.1016/j.msea.2013.05.00210.1016/j.msea.2013.05.002 ↗
38. 10.1177/0267083623121261010.1177/02670836231212610 ↗
39. Feng B, Yang H-k, Li X-h, et al. Development of accumulative roll bonding for metallic composite material preparation and mechanical/functional applications. Journal of Iron and Steel Research International 2024: 1–11.
40. 10.1016/j.scriptamat.2018.05.04410.1016/j.scriptamat.2018.05.044 ↗
41. 10.1016/j.msea.2020.14005510.1016/j.msea.2020.140055 ↗
42. 10.1016/j.jmrt.2020.03.07710.1016/j.jmrt.2020.03.077 ↗
43. 10.1016/j.msea.2021.14251010.1016/j.msea.2021.142510 ↗
44. 10.1016/j.actamat.2020.11654610.1016/j.actamat.2020.116546 ↗
45. 10.1088/1741-4326/ac81d910.1088/1741-4326/ac81d9 ↗
46. 10.1016/j.msea.2020.14062410.1016/j.msea.2020.140624 ↗
47. 10.1016/j.matchar.2018.11.01010.1016/j.matchar.2018.11.010 ↗
48. 10.1016/j.msea.2019.01.11710.1016/j.msea.2019.01.117 ↗
49. 10.1016/j.actamat.2006.01.00410.1016/j.actamat.2006.01.004 ↗
50. 10.1016/j.actamat.2019.11.00910.1016/j.actamat.2019.11.009 ↗
51. 10.1016/j.jmapro.2023.10.03010.1016/j.jmapro.2023.10.030 ↗
52. 10.1007/s42114-022-00522-210.1007/s42114-022-00522-2 ↗
53. 10.1016/S1359-6462(99)00077-910.1016/S1359-6462(99)00077-9 ↗
54. 10.1007/BF0337751510.1007/BF03377515 ↗
55. 10.1007/s10853-008-2809-510.1007/s10853-008-2809-5 ↗
56. 10.1016/j.actamat.2004.09.03310.1016/j.actamat.2004.09.033 ↗
57. 10.1016/j.matdes.2015.10.08810.1016/j.matdes.2015.10.088 ↗
58. 10.1016/j.jmrt.2023.09.04610.1016/j.jmrt.2023.09.046 ↗
59. 10.1007/s11661-017-4069-y10.1007/s11661-017-4069-y ↗
60. 10.1016/j.actamat.2005.01.04610.1016/j.actamat.2005.01.046 ↗
61. 10.1299/jsme1958.18.120910.1299/jsme1958.18.1209 ↗
62. 10.1016/j.pmatsci.2023.10113110.1016/j.pmatsci.2023.101131 ↗
63. 10.1016/j.msea.2013.11.02610.1016/j.msea.2013.11.026 ↗