journal article·2025-11

Experimental and numerical buckling analysis of CNT reinforced polymer composite plates

Asha Patel, Priyadarshi Das, Madhusmita Biswal, Shishir Kumar Sahu

Materials Science and Technology· Volume 41· Issue 16
Publisher page

Abstract

A combined experimental and numerical buckling analysis is performed for Carbon nanotube-reinforced composite (CNTRC) laminates under uniaxial in-plane compressive load. A finite element simulation program is developed in MATLAB environment and the recorded buckling responses are verified with the experimental results. Closely aligned numerical and experimental results exhibits that inclusion of 0.3% CNT increases buckling strengths of CNTRC composite laminates, regardless of their geometrical parameters. Clamped edge laminates exhibit higher buckling mode shapes, influenced by aspect ratio and edge restraint. Microscopic analysis of CNTRC's fractured surface under compression shows enhanced buckling strength attributed to CNTs’ bridging and pullout effects in the matrix, suppressing crack initiation and propagation. Field Emission Scanning Electronic Microscope (FESEM) is utilized for this investigation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Structure Analysis and Optimization · Structural Behavior of Reinforced Concrete · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute of Technology

Siksha ‘O’ Anusandhan Deemed to be University

BPUT

References (49)

Show source-provided references
1. 10.1038/354056a010.1038/354056a0 ↗
2. 10.1016/S0022-3697(97)00045-010.1016/S0022-3697(97)00045-0 ↗
3. 10.1016/S0266-3538(98)00087-610.1016/S0266-3538(98)00087-6 ↗
4. 10.1007/BF0232355210.1007/BF02323552 ↗
5. 10.1061/(ASCE)0893-1321(2005)18:4(215)10.1061/(ASCE)0893-1321(2005)18:4(215) ↗
6. 10.1177/073168440707951510.1177/0731684407079515 ↗
7. 10.1108/1757986131132171710.1108/17579861311321717 ↗
8. 10.1108/AEAT-01-2019-000510.1108/AEAT-01-2019-0005 ↗
9. 10.1016/j.ijsolstr.2005.05.01410.1016/j.ijsolstr.2005.05.014 ↗
10. Shen SH, Zhu ZH. Buckling and postbuckling behaviour of functionaly graded nanotube-reinforced composite plates in thermal environments. Comput Mater Sci 2010; 18: 155–182.
11. 10.1007/s12206-011-0127-310.1007/s12206-011-0127-3 ↗
12. 10.1016/j.compositesb.2012.01.06710.1016/j.compositesb.2012.01.067 ↗
13. 10.1016/j.compstruct.2012.11.00610.1016/j.compstruct.2012.11.006 ↗
14. 10.1016/j.tws.2013.05.00810.1016/j.tws.2013.05.008 ↗
15. 10.1016/j.cma.2013.09.00110.1016/j.cma.2013.09.001 ↗
16. 10.1016/j.compstruct.2013.09.04310.1016/j.compstruct.2013.09.043 ↗
17. 10.1016/j.compositesb.2015.01.03310.1016/j.compositesb.2015.01.033 ↗
18. Pouresmaeel S, Fazelzadeh SA, Ghavanloo E. Buckling analysis of spherical composite panels reinforced by carbon nanotube. Mech Adv Compos Struct 2015; 2: 135–144.
19. 10.1016/j.compositesb.2016.09.00110.1016/j.compositesb.2016.09.001 ↗
20. 10.12989/scs.2016.22.6.144510.12989/scs.2016.22.6.1445 ↗
21. 10.1016/j.compositesb.2016.03.03110.1016/j.compositesb.2016.03.031 ↗
22. 10.1007/s00707-016-1781-410.1007/s00707-016-1781-4 ↗
23. 10.1016/j.compositesb.2016.10.00210.1016/j.compositesb.2016.10.002 ↗
24. 10.1142/S021945541750064X10.1142/S021945541750064X ↗
25. 10.12989/sss.2017.19.3.30910.12989/sss.2017.19.3.309 ↗
26. 10.1016/j.ast.2018.03.02210.1016/j.ast.2018.03.022 ↗
27. 10.1016/j.compstruct.2018.08.03010.1016/j.compstruct.2018.08.030 ↗
28. 10.1016/j.tws.2019.10641710.1016/j.tws.2019.106417 ↗
29. 10.1016/j.ast.2020.10575310.1016/j.ast.2020.105753 ↗
30. 10.3390/nano1112345910.3390/nano11123459 ↗
31. 10.1016/j.ast.2022.10736810.1016/j.ast.2022.107368 ↗
32. 10.1016/j.cma.2013.11.01910.1016/j.cma.2013.11.019 ↗
33. 10.12989/scs.2015.18.2.42510.12989/scs.2015.18.2.425 ↗
34. 10.1016/j.compositesb.2016.03.03110.1016/j.compositesb.2016.03.031 ↗
35. Madenci E, Ozkilic YO, Hakamy A, et al. Experimental tensile test and micro mechanic investigations on carbon nanotube reinforced carbon fiber composite beams. Adv Nano Res 2023; 14: 443–450.
36. Madenci E, Ozkilic YO, Baharami A, et al. Behaviour of functionally graded carbon nano tube reinforced composite sandwich beams with pultruded GFRP core under bending effect. Struct Mater 2023; 10, http//doi.org/10.3389/fmats.2023.1236266
37. 10.3390/ma1602061410.3390/ma16020614 ↗
38. Madenci E, Ozkilic YO, Aksoylu C, et al. Experimental investigation and analytical verification of buckling of functionally graded carbon nanotube reinforced sandwich beams. Helion 2024; 10: e 28388.
39. 10.1016/j.engfailanal.2024.10805510.1016/j.engfailanal.2024.108055 ↗
40. 10.1016/j.physe.2017.05.00910.1016/j.physe.2017.05.009 ↗
41. 10.1016/j.tws.2022.10891810.1016/j.tws.2022.108918 ↗
42. 10.1016/j.istruc.2024.10602110.1016/j.istruc.2024.106021 ↗
43. 10.1016/j.tws.2019.10633810.1016/j.tws.2019.106338 ↗
44. Kolahdouzan F, Mosayyebi M, Ghasemi FA, et al. Free vibration and buckling analysis of elastically restrained FG-CNTRC sandwich annular nanoplates. Adv Nano Res 2020; 9: 237–250.
45. 10.1177/109963622090976610.1177/1099636220909766 ↗
46. 10.1142/S021945542450133510.1142/S0219455424501335 ↗
47. 10.1201/b1240910.1201/b12409 ↗
48. Reddy JN. Energy principles and variational methods in applied mechanics. 3rd ed. West Sussex, UK: John Wiley & Sons, 2002.
49. ASTM Standard D3039/D3039M-08. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken, PA: ASTM International, 2008.